Introduction
PHYTEC Meßtechnik GmbH 2000 L-525e_2
3
1
Introduction
The PHYTEC phyCORE Development Board, in EURO-card
dimensions (160 x 100 mm.), is a universal carrier board for start-up
and programming of the PHYTEC phyCORE-MPC555 Single Board
Computer module with two high density SMT (160 pins each, 0.63
mm. pitch) pin header connectors. The Development Board is fully
equipped with all mechanical and electrical components necessary for
the speedy and secure insertion and subsequent programming of the
high density PHYTEC phyCORE module. These components include
DB-9, DB-25, VG-96 and power socket connectors. The phyCORE
module can be plugged like a “big chip” onto the Development
Board’s pin header receptacles. Once programmed, the phyCORE
module can be removed from the Development Board and inserted
like a “big chip” in a target hardware application.
The following phyCORE Single Board Computer modules can be
used in conjunction with the Development Board:
•
phyCORE-MPC555
The hardware manual for this Development Board does not describe
in detail the features of the phyCORE modules, which are not relevant
for the basic functioning of the Development Board. For module and
controller-specific features please refer to the corresponding hardware
manuals/User’s Manuals.
