Preface
PHYTEC Meßtechnik GmbH 2000 L-525e_2
1
Preface
This manual describes only the functions of the PHYTEC
Development Board. The controllers and relevant Single Board
Computers for use with the Development Board are not described
herein. Additional controller- and board-level information and
technical descriptions can be found in appropriate Hardware Manual
or User’s Manual support documentation. If software is included
please also refer to additional documentation for this software.
In this hardware manual and in the attached schematics, low active
signals are denoted by a "/" in front of the signal name (i.e.: /RD). A
"0" indicates a logic-zero or low-level signal, while a "1" represents a
logic-one or high-level signal.
Declaration regarding EMV-Conformity of the
PHYTEC Development Board
PHYTEC Development Boards (henceforth „products“) are designed
for installation in electrical appliances or as dedicated Evaluation
Boards (i.e.: for use as a test and prototype platform for
hardware/software development) in laboratory environments.
Attention:
PHYTEC products lacking protective enclosures are subject to
damage by ESD and, hence, may only be unpacked, handled or
operated in environments in which sufficient precautionary measures
have been taken in respect to ESD-dangers. It is also necessary that
only appropriately trained personnel (such as electricians, technicians
and engineers) handle and/or operate these products. Moreover,
PHYTEC products should not be operated without protection circuitry
if connections to the product's pin header rows are longer than 3 m.
