Photron FASTCAM SA-X2, Hardware Manual

Page: 49 / 74

FASTCAM SA-X2 49
3.1 Specifications
3.1.4 General Specifications
Environment Conditions
Storage Temperature
-20 - 60degC (No Condensation)
-4 – 140degF (No Condensation)
Storage Humidity 85% or less (No Condensation)
O p e r a t i n g
Temperature
SA-X2
0 – 40degC (No Condensation)
32 – 113degF (No Condensation)
SA-X2 RV
0 to 45 ℃ (No Condensation)
32ºF ~ 109ºF (No Condensation)
Operating Humidity 80% or less (No Condensation)
Pollution degree Degree 2 according to IEC60664-1
Overvoltage category Category II according to IEC60664-1
Maximum use altitude 2,000m or lower
External Dimensions
Camera Body
SA-X2
177.7 (H) x 160.0 (W) x 310.0 (D) mm, excluding protrusion
7.0" (H) x 6.3" (W) x 12.2" (D)
SA-X2 RV
231.7 (H) x 160.0 (W) x 310.0 (D) mm, excluding protrusion
9.1" (H) x 6.3" (W) x 12.2" (D)
AC Adapter
47.0 (H) x 116.0 (W) x 254.0 (D) mm, excluding protrusion
1.9” (H) x 4.6” (W) x 10.0” (D)
AC Power Supply
Supply Voltage 100V - 240V (type A cable: up to 125V)
Supply Frequency 50Hz - 60Hz
Power Consumption 210W
DC Power Supply
Power Voltage 20V - 36V
Power Consumption 230VA
Weight
Camera Body
SA-X2 8.8 kg 19.4 lbs, excluding protrusion
SA-X2 RV 12.6 kg 27.8 lbs, excluding protrusion
AC Adapter 1.6 kg 3.5 lbs
Photron has verified two types of AC cables, type A (standard for Japan, USA, Canada, etc.)
and type SE (standard for Germany, France, etc.). However, when those cables cannot
properly receive power when plugged in, use the proper AC cable for the region's standards
and verify that AC cable works properly.
For inquiries regarding the recommended AC cable for each region, contact that region's
Photron branch office or the distributor.