Photron FASTCAM SA-X2, Hardware Manual

Page: 26 / 74

FASTCAM SA-X2 26
1.2 Part Names
1.2.10 I/O Port Connector
The input/output signal connectors on the system have been bundled into a single connector, the
"I/O PORT" connector, and it is possible to connect to and access each type of signal by using the
specialized multi-connector. By inputting an external trigger or synchronization signal and by
outputting exposure timing or synchronization signal, these signals can be used as a part of the
system.
A signal other than the specified signal must not be input to the various connectors.
Use extreme caution as there is a risk of damage to both devices, the input device and the
output device.
For the signal which can be inputted, refer to "1.3 Input / Output Signal Types", page 28.
I/O PORT (Camera Body)
AA3L0C-P26RF00-0000