Photron FASTCAM SA-X2, Hardware Manual

Page: 36 / 74

FASTCAM SA-X2 36
1.3 Input / Output Signal T
ype
s
1.3.10 Signal Delay
With the system, you can set the signal delay time or pulse width for the various signals that are
input and output. Pulse width and delay settings for the various signals to input/output are made
with PFV or the remote controller (optional). The content of each setting is listed in the chart
below.
• SYNC OUT TIMES
Output a SYNC (vertical synchronization signal) multiplied by X from SYNC OUT.
Values 1, 2, 4, 6, 8, 10. A value of 1 is normal output.
Set from the SYNC IN/OUT menu, SYNC OUT TIMES submenu.
Output a SYNC (vertical synchronization signal) from SYNC OUT that is 30 times SYNC.
Example: For a frame rate of 1,000 fps, SYNC OUT TIMES setting of 2.
Example: For a frame rate of 1,000 fps, SYNC OUT TIMES setting of 4.
Setting Item Setting Range (Value)
TRIG TTL IN DELAY 0-60 (s) 100 ns units
SYNC IN DELAY 0-1/frame rate (s) 100 ns units
GENERAL IN DELAY 0-60 (s) 100 ns units
TRIG OUT WIDTH 0-1 (ms) 100 ns units
SYNC OUT DELAY 0-1/frame rate (s) 100 ns units
SYNC OUT WIDTH 0-500 (us), 1/frame rate (s) at 2,000 fps or higher 100 ns units
EXPOSE OUT DELAY 0-1/frame rate (s) 100 ns units
SYNC OUT TIMES 0.5, 1, 2, 4, 6, 8, 10, 20, 30 (* 1 is the default setting)
1,000 fps Synchronization Signal
SYNC OUT Output
1,000 fps Synchronization Signal
SYNC OUT Output