Photron FASTCAM Mini CX Series, Hardware Manual

Page: 24 / 66

10
FASTCAM Mini CX100
1
.2
Pa
rt
Na
m
es
1.2.5.
Gigabit Ethernet connector
It is an Ethernet connector for communicating with the PC and is a common RJ45 connector.
Connect an off-the-shelf 1000BASE-T compatible interface board and this product with a LAN cable. For the
LAN cable, prepare a UTP or STP Cat 5e (enhanced category 5) or higher LAN cable (UTP: Unshielded Twisted Pair,
STP: Shielded Twisted Pair).
•
Photron recommends using an STP cable over long distances or in noisy locations.
• When both of Gigabit Ethernet connector on the system and wireless communication are connected, the
connection to Gigabit Ethernet connector supersedes the other.
•
The system’s factory default IP address of Gigabit Ethernet connector is below:
Gigabit Ethernet
•
IP ADDRESS: 192.168.0.10
NETMASK
：
255.255.255.0
GATEWAY ADDRESS
：
0.0.0.0
•
PORT: 2000 (Static, unchangeable)
•
Wi-Fi
•
IP ADDRESS
：
192.168.0.10
NETMASK
：
255.255.255.0
GATEWAY ADDRESS
：
0.0.0.0
•
PORT: 2000 (Static, unchangeable)