Photron FASTCAM Mini CX Series, Hardware Manual

Page: 8 / 66

Us
in
g
th
e
S
ys
te
m
S
a
fe
ly
a
n
d
Corre
ctl
y
◼ Always unplug the system when cleaning it or when it is unused for a long period of time. Leaving
or storing the system connected to the power source might cause fire from insulation deterioration or
electrical discharge.
◼ Please consult us in advance when you perform an event by which laser light or direct rays fall on
the image sensor surface.
◼ Do not set the system in a location where the temperature gets unusually hot.
The trunk and inside of a car can get especially hot in summer.
Doing so can cause the outer case and internal components to deteriorate or cause a fire.
◼ Do not place the system in a location prone to oily smoke or steam, or in a location with a lot of
humidity or dust.
Oil, moisture, and dust conduct electricity, which can cause a fire or electric shock.
◼ Ambient temperature 0 to 40°C, humidity 85% RH or lower, maximum altitude 2,000 m or lower. In
addition, use in a condensation-free environment.
Use in a condition out of the above limits can cause malfunction.
◼ Do not store the equipment in a location where the temperature goes below -20°C or higher than
60°C. Also, prevent condensation from forming during shipment.
◼ When shipping, remove the connecting cable and use the original packaging or a dedicated carrying
case.
Do not ship the equipment in an environment where the temperature goes below -20°C or higher
than 60°C. Also, prevent condensation from forming during shipment.
Caution