Photron FASTCAM Mini CX Series, Hardware Manual

Page: 21 / 66

7
FASTCAM Mini CX100
A.1
Ref
e
re
n
ce
I
n
fo
rm
ati
o
n
1.2.3.
Status Display LEDs on the Camera Body
There are a number of LEDs on the system’s camera body. These LEDs indicate the status of the system. The
function of each LED is explained here.
⚫ LEDs on the rear
Item Color Lighting status Status
POWER
Lighted Camera is being started in normal mode.
ー
Unlit Power is turned off.
Blinking slow Factory default is running.
Blinking fast Camera does not start properly.
Blinks three times Remaining charge low.
Blinking Power is being turned off.
Lighted Camera is running in reset mode.
BATTERY
Lighted
Charging
(DC power
connected)
Fully charged.
Blinking slow Can not charge due to temperature limit.
ー
Unlit
Battery running
(DC power not
connected)
Remaining charge 20 to 100%.
Lighted Remaining charge 10 to 20%.
Blinking slow Remaining charge 10% or less.
Blinking fast Out of charge.
SYSTEM
Lighted Startup operation is complete successfully.
Blinking slow During startup process.
READY / REC Lighted
Recording is finished. Save the data to PC, CFast card, etc. Note that the
lamp will go out on switching to Live mode.
ー
Unlit Not in Ready or Rec state
Blinking fast Endless recording state.
Blinking
The system recorded the full memory of endless recording and is waiting
for the start of recording by PFV or an external trigger.
Blinking slow Transferring the data to PC or CFast card.
Blinking fast
A trigger was input to the camera and the system is recording till the full
memory.
SYNC
Lighted Camera is in slave mode and receiving synchronization signals.
Lighted
Camera is in slave mode and not receiving external synchronization
signals.
ー
Unlit Synchronization is not set up.