Photron FASTCAM Mini CX Series, Hardware Manual

Page: 22 / 66

8
FASTCAM Mini CX100
1
.2
Pa
rt
Na
m
es
⚫ LEDs on the front
Item Color Lighting status Status
Synchronization
icon
Lighted
Camera is in slave mode and receiving synchronization signals.
Lighted
Camera is in slave mode and not receiving external synchronization
signals.
ー
Unlit
Synchronization is not set up.
READY / REC
icon
Lighted
Recording is finished. Save the data to PC, CFast card, etc. Note that the
lamp will go out on switching to Live mode.
ー Unlit Not in Ready or Rec state
Blinking fast
Endless recording state.
Blinking
The system recorded the full memory of endless recording and is waiting
for the start of recording by PFV or an external trigger.
Blinking slow
Transferring the data to PC or CFast card.
Blinking fast
A trigger was input to the camera and the system is recording till the full
memory.
BATTERY
icon
Lighted
Remaining charge 10 to 20%.
ー
Unlit
Remaining charge 20 to 100%.
Lighted Fully charged.
Blinking slow Remaining charge 10% or less.
Blinking fast Out of charge.
Blinking slow Can not charge due to temperature limit.
⚫ LEDs on the side
Item Color Lighting status Status
Error icon
Lighted
CFast card has an error. It is unavailable.
ー Unlit
Works normally.
During access
icon
Blinking CFast card is being accessed.
ー Unlit
CFast card is not being accessed.
Card detection
icon
Lighted
CFast card is inserted and detected properly.
ー Unlit
CFast card is not detected.
•
Refer to “1.2.4. POWER
／
RESET switch” for reset mode.