![Photron Fastcam BC2 HD Hardware Manual Download Page 58](http://html1.mh-extra.com/html/photron/fastcam-bc2-hd/fastcam-bc2-hd_hardware-manual_1553652058.webp)
4. Connecting a PC
46
4.1. Connecting the Gigabit Ethernet Interface to a PC
The system can be controlled from a PC using the Gigabit Ethernet interface. This section explains
the required setup when connecting the system to a PC.
•
For how to operate the Photron FASTCAM Viewer software, refer to the "Photron FASTCAM
Viewer User's Manual".
To connect a PC to the system, connect the system to a commercially available
1000BASE-T-compatible interface board with a LAN cable. For the LAN cable, prepare a UTP or
STP CAT5e (enhanced category 5) or higher LAN cable (UTP: unshielded, STP: shielded).
The maximum cable length between the PC and the system is, compliant to the 1000BASE-T
specification, up to 100 m. One PC can connect to a maximum of 64 Photron Gigabit Ethernet
interface equipped cameras using a hub. When connecting multiple devices, connect them through a
switching hub that can connect at 1000BASE-T. The maximum length of the cable that connects the
system (or PC) to the switching hub is also 100 m.
Settings
▪
System settings
▪
PC settings
·
IP address
·
IP address
·
Packet size
·
Time out length
·
Communications port
•
The system is only 1000BASE-T compatible. When using a PC compatible with only 10BASE-T or
100BASE-TX, the PC must be connected through a 10BASE-T, 100BASE-TX, and 1000BASE-T
compatible switching hub.
•
The system's factory default IP address is listed below:
IP ADDRESS > 192.168.0.10
NETMASK > 255.255.255.0
GATEWAY ADDRESS > 0.0.0.0
PORT > 2000 (fixed, not changeable)
•
Photron recommends using an STP cable over long distances or in noisy locations.
•
For the system's IP address, see "4.1.2 Setting the IP Address", page 47.
•
For the PC configuration, refer to the "Photron FASTCAM Viewer User’s Manual".
Summary of Contents for Fastcam BC2 HD
