Photon Focus MV0 CMOSIS Series, User Manual, Page: 48 / 111

6 I/O Control
O
u t p u t S i g n a l P a t h " L E D S 0 "
O u t p u t S i g n a l P a t h " L E D S 1 "
O u t p u t S i g n a l P a t h " L E D S 2 "
O u t p u t S i g n a l P a t h " L i n e O u t "
S t a t u s
I n v e r t
S
o
u
r
c
e
.
.
.
L E D S 0
L E D S 1
L E D S 2
L i n e O u t
Figure 6.2: Output Signal Path
• Input Line
• Counter Active Status
• Timer Active Status
• User Output
• Acquisition Trigger Wait Status
• Acquisition Active Status
• Frame Trigger Wait Status
• Frame Active Status
• Exposure Active Status
• Frame Valid Status
• Line Valid Status
• Heartbeat
• Serial Communication
• Constant 0 Value
• Constant 1 Value
If the source heartbeat is selected, the led shows a pulsating behaviour, when the camera is
idle (no image capturing is active). It means, the intensity starts from dark and goes slowly to
bright and slowly to dark again. Every time, when the camera is acquiring and sending images,
the LED changes to a blinking characteristic.
If the source serial communication is selected, the led flashes every time when the host
communicates with the camera, due to changing or reading of camera parameters.
48 of 111 MAN078 12/2018 V1.1