Photon Focus MV0 CMOSIS Series, User Manual, Page: 110 / 111

C Use Cases
2. Set LUTValue (in category LUTControl ) to desired value. The LUTValue corresponds to the
grey value of the 8 bit output signal of the LUT.
The LUTIndex is auto incremented internally after setting a LUTValue . If consec-
utive LUTIndex are written, then it is required to set LUTIndex only for the first
value. For the next values it is sufficient to set only the LUTValue .
C.4.5 Predefined LUT settings
Some predefined LUT are stored in the camera. To activate a predefined LUT:
1. Select LUT and RegionLUT (if required) as described in Section C.4.2 and Section C.4.3.
2. Set
LUTAutoMode
(in category
LUTControl
) to the desired value.
3. If the LUTAutoMode requires additional settings (e.g. Gain LUTAutoMode ), then it can be set
with LUTAutoValue .
110 of 111 MAN078 12/2018 V1.1