Photon Focus MV0 3D06 Series, User Manual, Page: 82 / 125

11 Image Data Processing
11.6 Status Line and Image Information
There are camera properties available that give information about the acquired images, such
as integration time, ROI settings or average image value. These properties can be queried by
software. Alternatively, a status line within the image data can be switched on that contains all
the available image information.
11.6.1 Image Average Value
The average image value gives the average of an image in 12 bit format (0 .. 4095 DN),
regardless of the currently used grey level resolution. Note that the 12-bit format was chosen
to be compatible with other Photonfocus cameras
11.6.2 Status Information
Status information is inserted in the 4 LSB in the last 3D data row if DataFormat3D = 3 or 4 (see
bits labeled STAT in Fig. 11.10). LSB are transmitted first (see Table 11.1). The status
information is divided in fields of 32 bits each, where every information field corresponds to
one information parameter (see Table 11.2). Unused bits are set to 0.
Col 0 Col 1 Col 2 Col 3 ... Col n
STAT[3:0] STAT[7:4] STAT[11:8] STAT[15:12] ... STAT[4*n+3:4*n]
Table 11.1: STAT value
11.6.3 Camera Type Codes
.
82 of 125 MAN082 09/2019 V1.0