English
Deutsch
Español
Français Português
日本語
简体中文
5
Inception 12A / Inception 12DSP
SPECIFICATIONS
Configuration
2-Way Stage Speaker/45 Degree Floor Monitor
Transducers
Low Frequency Cone
12” Paper/Fiber Composite Woofer
High Frequency Cone
1.75” Pure Titanium Compression Horn
Frequency Response
Frequency Response (-6 dB)
48 Hz - 20 kHz
Frequency Response (-10 dB)
45 Hz - 22 kHz
Nominal Coverage
80 Degree Conical
Maximum SPL
11 dB
Amplifiers
Amplifier Technology
Class D Low Frequency / Class AB High Frequency
Amp Total Output <1% THD
550 Watt RMS <0.1% THD / 1100 Watt Peak
LF Output <1% THD
450 Watt RMS <0.1% THD / 900 Watt Peak
HF Output <1%THD
100 Watt RMS <0.1% THD / 200 Watt Peak
Controls
12A: Power, Gain A, Gain B, EQ High, EQ Low, Low Cut
12DSP: Power, Gain A, Gain B, EQ, Delay, Feedback Killer,
Front LED Mode, Timed Turn Off
Signal Indicators
Power, Signal A, Signal B, Thermal, Peak
Connectors
Two balanced XLR/TRS/mic (Combo) level inputs, balanced
male line out, Power Connector
12DSP adds: Stereo RCA Inputs
Enclosure
Impact resistant polymer
Grille
Black powder coated 18 gauge steel
Suspension / Mounting
Three M10 Suspension Points
Pole Mount
Dual angle 5 mm pole mounts with 8 degree tilt option for
extended audience reach
Handles
PU Handles
Box Dimensions (HxWxD)
65 x 75 x 72.5 mm
(25” x 14.8” x 14.7”)
Unit Weight
19 kg (41.9 lbs)
Advanced Electronics
Theorem™ DSP (Inception 12DSP only)
High dampening factor
Automatic feedback killer
Woofer stablizing circuitry
Delay setting for multi-speaker alignment
Phase correction
Smart EQ
Time alignment
Phase accurate digital crossover
4th Order Linkwitz-Riley Crossover
Transducer protection
Transducer Protection
