![background image](http://html1.mh-extra.com/html/phonic/inception-12a/inception-12a_user-manual_1552893007.webp)
English
Deutsch
Español
Français Português
日本語
简体中文
Inception 12A / Inception 12DSP
Standard 5mm
pole mount
8
゚
downtilt option for
extended sound projection
Suspended from integrated
M10 installation points
45
゚
floor monitor
position
12.
Power LED
This LED will light up when the Inception speaker is plugged into
a suitable power source and turned on.
13.
Thermal LED
The thermal LED will light up when the speaker heats up to
temperatures that may be detrimental to operation. While the
Inception has internal cooling mechanisms, depending on the
environment and other attributes, the thermal protection circuitry
may activate. If this LED lights up, it’s suggested that customers
turn the speaker off and let it cool for a short time before turning
it back on.
WARNING:
To better prevent overheating, users should keep at
least one foot between the back of the unit and the nearest wall.
Do not cover or wrap in any materials that may impede airflow,
including cloth, fabrics or draperies, when in use. Do not install
in direct sunlight to avoid overheating. Phonic suggests use of
sunshades if necessary.
14.
Peak LED
This LED will light up when the Inception speaker hits peak output.
For best results, adjust input level controls to a point that will only
allow this LED to light up on occasion.
15.
AC Power Connector
Connect the included AC power cable to this connector and into a
suitable power source allowing the unit to be powered.
16.
Voltage Selector
This switch allows users to change the input voltage requirements
of the Inception’s power supply between 100V to 127V and 220V
to 240V as local voltage levels dictate. This allows the unit to
be used overseas without having to alter or replace the internal
power supply.
WARNING:
Do not change the voltage while the unit is in
operation.
17.
Power Switch
This switch will turn the Inception speaker on and off.
APPLICATIONS
INSTALLATION SUSPENSION
Inception speakers offer three integrated M10 flypoints for speaker suspension. These are covered by a plastic covers to ensure the
Inception’s slick appearance when flypoints are not in use. Any rated forged eyebolt with an M10 thread can be used for suspension.
The suspending, rigging and mounting of the Inception Speakers can cause members of the public to be exposed to serious health risk,
as well as the possibility of death. If you are NOT fully qualified and certified to mount these speakers by relevant local, state, or national
authorities, do not under any circumstances try to rig, suspend or mount this system. All relevant safety regulations must be followed.
If you are not completely qualified or do not know of said regulations, ensure you consult qualified personnel for assistance.