Phonetics Sensaphone SCADA 3000 User Manual Download Page 128

Page: 128 / 336

SYSTem STATUS

The third choice on the main menu, System Status presents a four lines of data: Date/Time,

Programs Running, Datalog activity, and Alarm status. More comprehensive system status

information is available through the software program.

ReTURN

The fourth menu choice is Return. Return presents the “normal” view display—a scrolling list

of the main unit’s I/O points and, as the name implies, the information being returned by them.

13-6

SCADA 3000 User’s Manual

Summary of Contents for Sensaphone SCADA 3000

















































































































































































































































































































































Search results

Summary of Contents for Sensaphone SCADA 3000

Reviews:

Related manuals for Sensaphone SCADA 3000

Brands by name

Popular brands

Phonetics Sensaphone SCADA 3000, User Manual

Search results

Summary of Contents for Sensaphone SCADA 3000

Reviews:

Related manuals for Sensaphone SCADA 3000

Brands by name

Popular brands