Installation
SG(AG) 300 control unit
16
75082(-)
6.
Installation
6.1
Safety notices to observe during installation
Basic safety rules must be followed in order to ensure that the end product can be continually op-
erated in a safe manner. These rules must be observed while using the end product and while in-
stalling the SG(AG) 300 control unit.
6.1.1
Avoiding electrical faults
The power supply cord is designed to be connected to an outlet near the floor. Be sure to consider
the length of the power cord when designing the dimensions for your end product in order to mini-
mize the associated risks.
6.1.2
Ensuring operational reliability during installation
The safety and reliability of the end product containing DewertOkin components can be ensured by
using the proper construction methods described below.
Overheating
A thermal fuse switches the SG(AG) 300 control unit off if it overheats.
CAUTION
The SG(AG) 300 control unit is equipped with a thermal fuse that triggers when the
unit overheats. If the temperature control has triggered, remove the control unit from
the power supply, allow to rest for 20 - 30 minutes and try again. If the control unit still
does not function, please contact your supplier / dealer.
Mechanical construction
A shield covering the sockets protects the connections from mechanical damage and accidental
unplugging.
Summary of Contents for Dewert Okin AG 300
Page 2: ......
