background image

SG(AG) 300 control unit 

Possible combinations 

75082(-) 

3.

 

Possible combinations

The SG(AG) 300 control unit can be combined as follows. The following basic combinations are 
possible: 

 

SG 300 control unit 

 

max. 5 single drives,  
max. 2 handsets, 
one locking element or operating element: e.g. supervisor, locking 
device or short circuit plug

 

SGAG 300 control unit  

max. 5 single drives, 
max. 2 handsets, 
one locking element or operating element: e.g. supervisor, locking 
device or short circuit plug, 
one rechargeable AG 300 battery

 

optional extra operating elements, e.g. MEDITOUCH, FOOT SWITCH 

Systems can be customized by combining drives, control units, handset, locking element or operat-
ing element and rechargeable AG300 battery as needed. 

DewertOkin has separate system instruction manuals containing additional information and instruc-
tions needed for these systems. 

3.1

 

Control unit variants 

Variant 1: SG 300  

Variant 2: SGAG 300 (with pluggable rechargeable AG 300 battery)  

3.2

 

Layout of system connections 

Refer to the sticker on the control unit for details about layout and positioning of the connections. 
The sticker is located above the sockets. It indicates the proper type of connections. The layout of 
the connection scheme is individual and depends on the system specifications. Figure 2 is only an 
example and shows you where the label is attached. 

 

Figure 2 

An illustration of where the connection layout sticker is positioned on the control unit 

A

 

Layout of connections (example) 

 

 

NOTICE 

Only connect the components according to the specifications found on the sticker on 
the control unit. Any other arrangement of connections may damage the control unit. 

Summary of Contents for Dewert Okin AG 300




































Reviews: