SG(AG) 300 control unit
Installation
75082(-)
23
1
Insert the rechargeable AG300 battery (A) in the rear receptacle of the controller (B). Then
press the rechargeable AG300 battery into the upper recesses until the snap element (C)
engages.
2
Connect the cable (E) to the battery socket.
3
Wrap the strain relief (D) around the battery plug and tighten it in position with the screw
(F, 3.9 x 9.5 DIN EN ISO 7049) to the SGAG 300 control unit.
Taking out the rechargeable AG300 battery
1
Loosen and remove the screw (F) from the strain relief (D) on the control unit (B).
2
Remove the battery plug (E) from the battery socket of the control unit.
3
Press the snap element (C) and pull the recharcheable AG300 battery (A) up and out.
6.2.5
Connecting the optional, additional Supervisor, Control Box or Short Circuit Plug
The Supervisor, the Control Box or the Short Circuit Plug can be connected to the optional Super-
visor socket. The sticker above the sockets shows the position of the Supervisor socket (refer to
page 9, figure 2).
1
Pull out the mains plug from the outlet.
2
Use a suitable tool to loose the locking clips (refer to page 19, figure 11).
3
Remove the shield cover from the control unit.
4
Insert plug of the Supervisor, Control Box or short-circuit plug in the Supervisor socket of the
control unit. Be sure to use the proper socket (the assignments of plugs to sockets is shown in
the connection layout diagram, refer to page 9, figure 2).
5
Push the shield cover with the locking clips onto the control unit.
6
Press the locking clips into the shield cover, until you hear it snap in.
6.2.6
Removing the SG(AG) 300 control unit
1
Pull out the mains plug from the outlet.
CAUTION
You should only connect and disconnect the cables when they are completely dis-
connected from any live current!
2
Open and remove the shield cover (refer to page 19, figure 11).
3
Disconnect all connecting cables from the SG(AG) 300 control unit.
4
Loose and remove all the mounting screws from the control unit.
5
Remove the control unit from the end product.
Summary of Contents for Dewert Okin AG 300
Page 2: ......
