Factory Line - Wireless LAN
3-48
PHOENIX CONTACT
7190_en_02
Add MAC list file
To configure several MAC addresses at once, a text file can be used with a list of all MAC
addresses. This file contains one MAC address per line, e.g.,:
00:50:C2:48:A2:28
00:50:C2:48:3B:EE
00:50:C2:1C:23:2B
In addition, specify whether all loaded MAC addresses are to be "active" or "inactive" and
the interface on which they are to be applied. The list is added to the existing entries. A
maximum of 500 entries can be stored.
3.5.4.7
"WLAN device/Adv. WLAN" menu
IAPP
The Inter Access Point Protocol (IAPP) is used to exchange control and additional
information between access points. For example, an access point sends an IAPP
notification to all other access points in the network when a client dials in. All other access
points can then remove the client from their table of dialed-in clients. The LLC Xid packets
originally defined in IAPP are always sent regardless of this setting when a client dials in.
Figure 3-45
"Adv. WLAN/IAPP" menu
Processing a MAC filter list takes about 1 second per entry. This time is also required after
booting to load the list.
