Description of CUTFOX 10
102786_C00_ia
PHOENIX CONTACT
2-3
Engli
s
h
Keypad
To operate the CUTFOX 10
0...9
Number keys for entering operating parameters.
The input point is indicated by the flashing cursor
on the display. Inputs can be overtyped from left to
right.
C
Delete button for incorrect inputs. All inputs in the
line marked by the cursor are set to 0
enter
Button for cursor control
mode
Button for operating mode selection
start
Button for operation start
(green LED lights up during operation, red LED
goes out)
stop
Button for interrupting operation and deleting dis-
plays
(red LED lights up during operation stop, green
LED goes out)
Hexagon spanner
(Size 3) for cutting blade changes. It is located on the underside of the housing.
Removal hook
For roller changes. It is located on the underside of the housing.
CD-ROM
Software for PC operation
RS-232 cable
CUTFOX 10 / PC, 2 m
Adapter
25-pos./female – 9-pos./male
Mains cable
Connecting to the power supply
