Phoenix Contact CLIPLINE CUTFOX 10, User Manual

Page: 65 / 78

Error Causes and Remedies
102786_C00_ia PHOENIX CONTACT
5-1
Engli
s
h
5 Error Causes and Remedies
In the event of a unit fault, the type of help depends on the fault scenario.
After the fault scenario is assessed, the help can be carried out in a targeted way under
the defined fault scenario.
Table 5-1 Fault scenarios
Fault Remedy Fault Scenario
No. See
CUTFOX 10 does not work after being switched on – Check the mains connection
– Check the mains fuse
Fault scenario 1 page 5-2
The cable cut stops and the display shows "transport
error" – Check the cable infeed
– Adjust application pressure of
the drive rollers
– Check / change drive rollers /
measurement rollers
Fault scenario 2 page 5-3
The display shows "cutting error" – Check cable cross section
– Check / change cutting blade
Fault scenario 3 page 5-5
Cable length is not correct – Adjust cable length Fault scenario 4 page 5-8