CUTFOX 10
5-8
PHOENIX CONTACT
102786_C00_ia
5.4
Fault Scenario 4
Cable length is not correct
If the cable length is not correct, you have to adjust the CUTFOX 10.
5.4.1
Adjustment of the Cable Length (Adjustment)
–
Press the "mode" button for approx. 5 s. The display shows Adjustment Mode
You could correct the cable length in the first line.
•
Enter "1000" for adjustment.
•
Press the "mode" button to change to Auto Mode.
•
Enter the cable length "1000 mm" with the number keys "0" to "9". When doing so,
move the cursor with the “Enter“ button.
•
Press the "start" button. The cable is cut.
•
Measure the cable length (e. g., 788 mm).
•
Change to Adjustment Mode. Press the "mode" button for approx. 5 s.
•
Enter measured value for adjustment (e. g., "788") eingeben.
The measuring unit is recalibrated.
Adjustment
Mode
ADJUSTMENT:
XXXX
SPEED HAND:
X
SPEED AUTOM: X
LANGUAGE:
X
mm
Auto Mode
QUANTITY:
XXX
GO TO: XXX
LENGTH:
XXXXX mm
