Phoenix Contact 1108712, User Manual

Page: 9 / 34

Installation
4063_en_B PHOENIX CONTACT
9/34
3 Installation
3.1 Mounting
To mount on a DIN rail:
1. Place the device onto a DIN rail from above (A) so that the upper housing keyway hooks
onto the top edge of the DIN rail.
2. Hold the device by the housing cover and carefully push the device toward the
mounting surface (B).
3. After the foot is snapped onto the DIN rail, verify that it is attached securely.
A
B
Figure 3-1 DIN rail mounting
To remove:
1. Use a suitable screwdriver to release the locking mechanism (A) on the snap-on foot of
the device.
2. Hold on to the device by the housing cover and carefully tilt it upward (B).
3. Remove the device from the DIN rail (C).
A
C
B
Figure 3-2 DIN rail removal