Phoenix Contact 1108712, User Manual

Page: 13 / 34

Configuration and startup
4063_en_B PHOENIX CONTACT
13/34
4 Configuration and startup
4.1 Default settings
The default network settings of the GW PN/DP 1E/1DB9 are:
IP address: 192.168.254.254
Subnet mask: 255.255.255.0
Gateway: 0.0.0.0
However, discover and basic configuration protocol (DCP) settings will overwrite the default
settings.
The default settings are invoked whenever the system is reset.
4.2 Web-based management
The user-friendly, web-based management (WBM)_ interface may be used to manage the
GW PN/DP 1E/1DB9 from anywhere in the network using a standard browser.
Comprehensive configuration and diagnostic functions, including a wide range of
information about the device itself, the current parameters, and the operating state, are
clearly displayed.
4.3 Login
To log in:
1. Set the IP address of the connected PC to the subnetwork of the GW PN/DP 1E/1DB9.
For example, IP = 192.168.254.10, subnetwork = 255.255.255.0.
2. Open a web browser and enter the IP address of the GW PN/DP 1E/1DB9 in the
“Address” field (default = 192.168.254.254).
Figure 4-1 “Log In” page