Phocos MPPTsolid, User Manual

Page: 36 / 71

36
To change the logging frequency, select a rate from the control. Click the Save and Exit
button to update the configuration and return to the main screen. The next session of
logging will be at this new sampling rate.
The data logging file is saved in the
Data folder. The file is formatted in the CSV format
for easy import into Excel.
The data format in the CSV file is as follows:
Unit ID, Date, Time, Vin, Iin, Vout, Iout, Pin, Pout
MPPTsolid Charge Controller Specifications
A standard unit comes pre configured with the following default settings:
Electrical Input Specifications
Max solar input voltage 230 Voc
Input Range 30-230 Voc
Max. input current 100 A
Input protection
No internal fuse, 100 A in-line input circuit breaker
recommended
Electrical Output Specifications
Battery voltage range
24 – 72 V
Max. output current 100 A
Idle self-consumption 3 W max.
Power conversion efficiency Up to 97%
Charge type 3-stage: float, main, boost
Battery type Lead acid (GEL, AGM, flooded)
Output voltage range User programmable 24-90 V via RS232 PC-interface
Battery temperature User programmable (mV/K)
Status display Green LED (operation), RS232 PC-interface
Output protection
No internal output fuse, 100 A in-line input circuit
breaker recommended
Data logging
Via RS232 PC-interface: PC data logging software
included
Operating temperature range -25° to +55°C with derating > 40 °C
Mechanical Specifications
Dimensions (WxHxD) 208 x 89 x 434 mm