EN 42
12.
MCP9350i
Hardware Repair
12.5. Riser
Card
12.5.1. Riser Card Subassembly Removal
1.
Remove the top cover. See paragraph 12.1.1.
2.
Remove the 2 mounting screws (1) from the riser card subassembly. See Figure 12.5-1.
3.
Disconnect the TV daughter card cable (2) from the TV tuner card. See Figure 12.5-2.
4.
Push the locking tab arm (3) on the motherboard PCI-E connector to release the PCI-E riser card. See Figure 12.5-2.
5.
Pull upwards on the riser card bracket (4) until the riser cards are free from the motherboard connectors. See Figure 12.5-2.
6.
Disconnect the SCART cable (5) from the graphic card. See Figure 12.5-3.
Figure 12.5-1
Figure 12.5-2
Figure 12.5-3
12.5.2. Riser
Card
Re-Assembly
To re-assemble the riser card subassembly, do all processes described in paragraph 12.5.1 in reverse order.
Note:
The TV daughter card cable (2) must be connected to A/V Input 2 on the TV tuner card. See Figure 12.5-2.
Note:
The torque setting required for the riser card subassembly mounting screws (1) is 8kg-cm
2
4
1
1
5
