18
6
Remove the drip tray.
7
Put a bowl with a capacity of at least 2 litres
under the spout to collect the descaling
mixture.
8
When the on/off button lights up continuously,
press the 1-cup button
q
and the 2-cup
button
at the same time for 3 seconds
until you hear a beep. Release the buttons
as soon as their lights as well as the selected
strength go out. This means that the descaling
procedure has been activated correctly.
D
Note:
If you press the 1-cup and 2-cup button
longer than 3 seconds, the machine does not
start the descaling cycle. If this happens, press
the 1-cup button and the 2-cup button at the
same time for 3 seconds again.
2L
4
Press the on/off button
3
. The on/off button
flashes slowly while the water heats up. The
machine is ready for descaling when the on/
off button lights up continuously.
5
Place the 1-cup pod holder
q
with a used
coffee pod in it in the coffee machine. Close
the lid and make sure it is properly locked.
D
Note:
Always put a used coffee pod in the pod
holder when you descale the machine. This
pod serves as a ‘filter’ to prevent the sieve or
hole in the pod holder from getting clogged
with scale residue.
B
Warning:
Make sure the lid is closed properly and the
lid lever is locked before you start descaling
the machine.
