Philips Selecon PL3 LED Luminaires Installation & User Manual Download Page 5

Page: 5 / 36

About this Manual

PL3 LED Luminaires

Installation & User’s Manual

PREFACE

1. About this Manual

The document provides installation and operation instructions for the following products:

• PL3 LED Luminaires (part number: PL3)

Please read all instructions before installing or using this product.

Retain this manual for future reference

. Additional

product information and descriptions may be downloaded at www.seleconlight.com.

Note:

All PL3 luminaires ship with a "bare-end" 39 inch/1 meter power input cable. Add -GR, -GP, or -GTL to the

part number to have a connector installed. All other accessories sold separately.

Product accessories can be found in

"ACCESSORIES"

2. ACCESSORIES

Contact your Authorized Philips Selecon Dealer for price and availability of all accessories for PL3 LED Luminaires.
Additional information can be found on the Philips Selecon web site at www.seleconlight.com.

PL3 LED Luminaire IR Remote

PL3 LED Luminaire Pan & Tilt Motor Kit / Clamps

Note:

Do Not install the PL3 LED Luminaire using C-Clamp (82019 or USCLAMP). This Luminaire requires the

longer bolt utilized in clamps Molded Yoke Rated C-Clamp (SC) or Mega Claw (MC).

PL3 LED Luminaire Barndoors & Holders

PL3 LED Luminaire Connectors

PL3 LED Luminaire Spare Power Input Cables

Part Number

Description

PL3IRR

PL3 LED Luminaire Handheld IR Preset Programmer

Part Number

Description

PL3MKIT

Pan & Tilt Motor Kit (note, includes all hardware, wiring and truss hook)

Selecon Molded Yoke Rated C-Clamp

Mega Claw, Black Anodized

Part Number

Description

PL3ACH

PL3 LED Luminaire Accessory Holder with Frame

20BDSF2020

Barndoor, Black

20BDSF20208

Barndoor, 8 Way, Black

20CFSF2020

Spare Color Frame

Part Number

Description

15A NEMA 5-15P Male Edison Connector

20A, Male Stage Pin Connector

GTL

20A, NEMA L5-20P Male Twist-Lock Connector

Part Number

Description

PL3BE

PL3 Luminaire AC Power Input Cable (39 inches / 1 meter), Powercon (luminaire AC in) with no
connector (bare end - user to supply connector)

PC1GP

PL3 Luminaire AC Power Input Cable (39 inches / 1 meter), Powercon (luminaire AC in) with Stage
Pin Connector (to power source)

PC1GTL

PL3 Luminaire AC Power Input Cable (39 inches / 1 meter), Powercon (luminaire AC in) with
Twistlock Connector (to power source)

PC1GR

PL3 Luminaire AC Power Input Cable (39 inches / 1 meter), Powercon (luminaire AC in) with Edison
Connector (to power source)

Summary of Contents for Selecon PL3 LED Luminaires





































Search results

Summary of Contents for Selecon PL3 LED Luminaires

Reviews:

Related manuals for Selecon PL3 LED Luminaires

Brands by name

Popular brands

Philips Selecon PL3 LED Luminaires, Installation & User Manual

Search results

Summary of Contents for Selecon PL3 LED Luminaires

Reviews:

Related manuals for Selecon PL3 LED Luminaires

Brands by name

Popular brands