Pan & Tilt Adjustments
7
PL3 LED Luminaires
Installation & User’s Manual
5. Pan & Tilt Adjustments
WARNING!
Before adjusting pan or tilt, the luminaire should be mounted per local and national safety codes.
To adjust tilt:
Step 1. Locate yoke lock handle, as illustrated in
Figure 1
, on side of yoke assembly.
Figure 1: PL3 Yoke Lock Handle
Step 2. Loosen yoke lock handle by hand.
Step 3. Position luminaire tilt (up or down) as desired.
Note:
Each luminaire contains a tilt indicator near the yoke lock handle to allow setting of luminaires at same angle.
Step 4. Hand-tighten, but do not over tighten, yoke lock handle.
To adjust pan:
Step 1. Loosen, but do not remove, nut securing clamp to yoke assembly.
Step 2. Position luminaire pan (left or right) as desired.
Step 3. Retighten clamp nut.
Note:
If Pan and Tilt Motors (PL3MKIT, sold separately) are installed, see
"Focus Button (also for manual Pan &
Tilt control*)" on page 9
for manual control operation or
"DMX CONTROL" on page 16
for DMX512 control
parameters.
Yoke Lock Handle
Yoke Assembly
Luminaire Tilt Indicator
