19
Preset programs
The bike has three different programs that have been designed for a
variety of workout goals. These programs factory preset work level
profiles for achieving different goals. The initial built-in level of difficulty
for each program is set to a relatively easy level. You may adjust the
level of difficulty (max level) for each program before beginning.
Programming preset programs
• Select the desired program by pressing fitness key then press confirm
key.
• The message window will ask you to enter your age. You may adjust
the age setting, using the Plus and Minus keys, then press confirm key
to accept the new number and proceed on to the next screen.
• You are now asked to enter your weight. You may adjust the weight
number using the Plus and Minus keys, then press confirm to continue.
• Next is time. You may adjust the Time and press confirm to continue.
• Now you are asked to adjust the max level. This is the peak exertion
level you will experience during the program (at the top of the hill).
Adjust the level and then press confirm.
• Now you are finished editing the settings and can begin your workout
by pressing the start button. You can also go back and modify your
settings by pressing the stop key to go back one level, or screen.
• If you want to increase or decrease the workload at any time during
the program press the Plus and Minus key. This will change the
workload settings of the entire profile, although the profile picture on
the screen will not change. The reason for this is so that you can see
the entire profile at all times. If the profile picture is changed it will
look distorted and not a true representation of the actual profile.
When you make a change to the workload, the message window will
show the current column, and program maximum, levels of work.
• During the program you will be able to scroll through the data in the
message window by pressing the display key
• When the program ends the message window will show a summary of
your workout. The summary will be displayed for a short time then the
console will return to the start-up display.
