Philips PICO BARISTO AMF, Service Manual

Page: 36 / 58

Test Mode Incanto
Filename
20150805_TestMode_PicoBaristo_v01.doc
02 Nicola.Laffi@philips
.com
06/08/2015 7/16
revNum Author Verified Approved SaveDate P/PP
1.3 Page 2 (INPUTS)
Start condition, no water inside water tank, no carafe or water spout
inserted, door open, drip tray removed, BU not inserted .
Insert a full Water T ank
The indication TANK -H20 changes from “N” to “Y”.
NOTE: the switching from “N” to “Y” requires about 1-2 seconds.
ERROR: The indication TANK-H2O doesn’t change; check the
capacitive sensor (fixing) and the wiring (JP19)
Insert the Carafe
The indication CARAFE changes from “N” to “Y”.
ERROR: The indication CARAFE doesn’t change; check the
Carafe/WaterSpout Sensor and the wiring (JP7) on the
keyboard.
Remove Carafe and insert the WaterSpout
The indication WAT -SP changes from “Y” to “N” and
WaterSpout changes from “N” to “Y”.
ERROR: The indication CARAFE or WAT-SP doesn’t change;
check the Carafe/WaterSpout Sensor and the wiring (JP7) on
the keyboard.
Insert the BrewUnit
The indications BU -P changes from “N” to “Y”.
NOTE: removing the BrewUnit the indication from “Y” to “ N”
requires about 2-3 seconds to switch.
ERROR: The indications BU -P doesn’t changes; check the BU
presence Microswitch and the wiring (JP21).
Test Mode Incanto
Filename
20150805_TestMode_PicoBaristo_v01.doc
02 Nicola.Laffi@philips
.com
06/08/2015 7/16
revNum Author Verified Approved SaveDate P/PP
1.3 Page 2 (INPUTS)
Start condition, no water inside water tank, no carafe or water spout
inserted, door open, drip tray removed, BU not inserted .
Insert a full Water T ank
The indication TANK -H20 changes from “N” to “Y”.
NOTE: the switching from “N” to “Y” requires about 1-2 seconds.
ERROR: The indication TANK-H2O doesn’t change; check the
capacitive sensor (fixing) and the wiring (JP19)
Insert the Carafe
The indication CARAFE changes from “N” to “Y”.
ERROR: The indication CARAFE doesn’t change; check the
Carafe/WaterSpout Sensor and the wiring (JP7) on the
keyboard.
Remove Carafe and insert the WaterSpout
The indication WAT -SP changes from “Y” to “N” and
WaterSpout changes from “N” to “Y”.
ERROR: The indication CARAFE or WAT-SP doesn’t change;
check the Carafe/WaterSpout Sensor and the wiring (JP7) on
the keyboard.
Insert the BrewUnit
The indications BU -P changes from “N” to “Y”.
NOTE: removing the BrewUnit the indication from “Y” to “ N”
requires about 2-3 seconds to switch.
ERROR: The indications BU -P doesn’t changes; check the BU
presence Microswitch and the wiring (JP21).
Test Mode Incanto
Filename
20150805_TestMode_PicoBaristo_v01.doc
02 Nicola.Laffi@philips
.com
06/08/2015 7/16
revNum Author Verified Approved SaveDate P/PP
1.3 Page 2 (INPUTS)
Start condition, no water inside water tank, no carafe or water spout
inserted, door open, drip tray removed, BU not inserted .
Insert a full Water T ank
The indication TANK -H20 changes from “N” to “Y”.
NOTE: the switching from “N” to “Y” requires about 1-2 seconds.
ERROR: The indication TANK-H2O doesn’t change; check the
capacitive sensor (fixing) and the wiring (JP19)
Insert the Carafe
The indication CARAFE changes from “N” to “Y”.
ERROR: The indication CARAFE doesn’t change; check the
Carafe/WaterSpout Sensor and the wiring (JP7) on the
keyboard.
Remove Carafe and insert the WaterSpout
The indication WAT -SP changes from “Y” to “N” and
WaterSpout changes from “N” to “Y”.
ERROR: The indication CARAFE or WAT-SP doesn’t change;
check the Carafe/WaterSpout Sensor and the wiring (JP7) on
the keyboard.
Insert the BrewUnit
The indications BU -P changes from “N” to “Y”.
NOTE: removing the BrewUnit the indication from “Y” to “ N”
requires about 2-3 seconds to switch.
ERROR: The indications BU -P doesn’t changes; check the BU
presence Microswitch and the wiring (JP21).
Test Mode Incanto
Filename
20150805_TestMode_PicoBaristo_v01.doc
02 Nicola.Laffi@philips
.com
06/08/2015 7/16
revNum Author Verified Approved SaveDate P/PP
1.3 Page 2 (INPUTS)
Start condition, no water inside water tank, no carafe or water spout
inserted, door open, drip tray removed, BU not inserted .
Insert a full Water T ank
The indication TANK -H20 changes from “N” to “Y”.
NOTE: the switching from “N” to “Y” requires about 1-2 seconds.
ERROR: The indication TANK-H2O doesn’t change; check the
capacitive sensor (fixing) and the wiring (JP19)
Insert the Carafe
The indication CARAFE changes from “N” to “Y”.
ERROR: The indication CARAFE doesn’t change; check the
Carafe/WaterSpout Sensor and the wiring (JP7) on the
keyboard.
Remove Carafe and insert the WaterSpout
The indication WAT -SP changes from “Y” to “N” and
WaterSpout changes from “N” to “Y”.
ERROR: The indication CARAFE or WAT-SP doesn’t change;
check the Carafe/WaterSpout Sensor and the wiring (JP7) on
the keyboard.
Insert the BrewUnit
The indications BU -P changes from “N” to “Y”.
NOTE: removing the BrewUnit the indication from “Y” to “ N”
requires about 2-3 seconds to switch.
ERROR: The indications BU -P doesn’t changes; check the BU
presence Microswitch and the wiring (JP21).
Test Mode Incanto
Filename
20150805_TestMode_PicoBaristo_v01.doc
02 Nicola.Laffi@philips
.com
06/08/2015 7/16
revNum Author Verified Approved SaveDate P/PP
1.3 Page 2 (INPUTS)
Start condition, no water inside water tank, no carafe or water spout
inserted, door open, drip tray removed, BU not inserted .
Insert a full Water T ank
The indication TANK -H20 changes from “N” to “Y”.
NOTE: the switching from “N” to “Y” requires about 1-2 seconds.
ERROR: The indication TANK-H2O doesn’t change; check the
capacitive sensor (fixing) and the wiring (JP19)
Insert the Carafe
The indication CARAFE changes from “N” to “Y”.
ERROR: The indication CARAFE doesn’t change; check the
Carafe/WaterSpout Sensor and the wiring (JP7) on the
keyboard.
Remove Carafe and insert the WaterSpout
The indication WAT -SP changes from “Y” to “N” and
WaterSpout changes from “N” to “Y”.
ERROR: The indication CARAFE or WAT-SP doesn’t change;
check the Carafe/WaterSpout Sensor and the wiring (JP7) on
the keyboard.
Insert the BrewUnit
The indications BU -P changes from “N” to “Y”.
NOTE: removing the BrewUnit the indication from “Y” to “ N”
requires about 2-3 seconds to switch.
ERROR: The indications BU -P doesn’t changes; check the BU
presence Microswitch and the wiring (JP21).
Test Mode Incanto
Filename
20150805_TestMode_PicoBaristo_v01.doc
02 Nicola.Laffi@philips
.com
06/08/2015 8/16
revNum Author Verified Approved SaveDate P/PP
Close the Door and Dreg Drawer
The indication DR&D OOR change from “N” to “Y”
ERROR: The indication DR&D OOR does not change; check the
Microswitch for the door and the wiring (JP21 or JP16). NOTE :
without the Dreg Drawer correctly inserted the DOOR in dication
cannot change !
Press the N button
The machine passes to the Page 3 ( BU PAGE )
PICO BARISTO 05 SERVICE MODE
5/11
1.3 Page 2 (INPUTS)
Insert a full Water Tank
The indication TANK-H20 changes from “N” to “Y”.
NOTE: the switching from “N” to “Y” requires about 1-2 seconds.
ERROR: The indication TANK-H2O doesn’t change; check the
capacitive sensor (fixing) and the wiring (JP19)
Insert the Carafe
The indication CARAFE changes from “N” to “Y”.
ERROR: The indication CARAFE doesn’t change; check the
Carafe/WaterSpout Sensor and the wiring (JP7) on the
keyboard.
Remove Carafe and insert the WaterSpout
The indication WAT-SP changes from “Y” to “N” and WaterSpout changes
from “N” to “Y”.
ERROR: The indication CARAFE or WAT-SP doesn’t change;
check the Carafe/WaterSpout Sensor and the wiring (JP7) on
the keyboard.
Insert the BrewUnit
The indications BU-P changes from “N” to “Y”.
NOTE: removing the BrewUnit the indication from “Y” to “N”
requires about 2-3 seconds to switch.
ERROR: The indications BU-P doesn’t changes; check the BU
presence Microswitch and the wiring (JP21).
Close the Door and Dreg Drawer
The indication DR&DOOR change from “N” to “Y”
ERROR: The indication DR&DOOR does not change; check the
Microswitch for the door and the wiring (JP21 or JP16). NOTE:
without the Dreg Drawer correctly inserted the DOOR indication
cannot change !
Start condition, no water inside water tank, no carafe or water spout
inserted, door open, drip tray removed, BU not inserted.