Philips PICO BARISTO AMF, Service Manual

Page: 40 / 58

Steam-Out PicoBaristo
FileName
20150804_SteamOut_PicoBaristo_v01.doc
02 Nicola.Laffi@philips
.com
07/08/2015 2/5
revNum Author Verified Approved SaveDate Pagina/pagine
Introduction
This document describes the Steam-Out procedure; the appli cation is used in order to empty the heater.
1 Steam Out
The machine enters in Steam-Out mode by holding pressed to gether:
• the B button and the L button;
while switching on the machine by main switch behind it .
Once entered the Steam Out mode the display shows the “STEAM
OUT” indication. Buttons can be released
IMPORTANT NOTE: to execute the Steam-out procedure the Ntc
sensor must work correctly; if some errors occurs on Ntc during t he
steam-out, the procedure can’t continue and an error me ssage is
shown on the display.
IMPORTANT NOTE: to execute the Steam-Out procedure the
DREGDRAWER must be in place and the DOOR must be closed.
If these 2 conditions are not respected a warning message is shown
on the display and the Steam-Out is interrupted.
The machine starts the Steam Out and in the display appea rs the
indication “ON”.
While the Steam Out runs the Electro valve is opened an d water
comes out the Water/Steam pipe.
When the Steam Out is complete the message “COMPLETE” is
shown on the Display.The Electro valves automatically clo ses and the
machine can be switched off.
When the Steam-Out is complete the following parameter s are reset to their default values:
Steam-Out PicoBaristo
FileName
20150804_SteamOut_PicoBaristo_v01.doc
02 Nicola.Laffi@philips
.com
07/08/2015 2/5
revNum Author Verified Approved SaveDate Pagina/pagine
Introduction
This document describes the Steam-Out procedure; the appli cation is used in order to empty the heater.
1 Steam Out
The machine enters in Steam-Out mode by holding pressed to gether:
• the B button and the L button;
while switching on the machine by main switch behind it .
Once entered the Steam Out mode the display shows the “STEAM
OUT” indication. Buttons can be released
IMPORTANT NOTE: to execute the Steam-out procedure the Ntc
sensor must work correctly; if some errors occurs on Ntc during t he
steam-out, the procedure can’t continue and an error me ssage is
shown on the display.
IMPORTANT NOTE: to execute the Steam-Out procedure the
DREGDRAWER must be in place and the DOOR must be closed.
If these 2 conditions are not respected a warning message is shown
on the display and the Steam-Out is interrupted.
The machine starts the Steam Out and in the display appea rs the
indication “ON”.
While the Steam Out runs the Electro valve is opened an d water
comes out the Water/Steam pipe.
When the Steam Out is complete the message “COMPLETE” is
shown on the Display.The Electro valves automatically clo ses and the
machine can be switched off.
When the Steam-Out is complete the following parameter s are reset to their default values:
Steam-Out PicoBaristo
FileName
20150804_SteamOut_PicoBaristo_v01.doc
02 Nicola.Laffi@philips
.com
07/08/2015 2/5
revNum Author Verified Approved SaveDate Pagina/pagine
Introduction
This document describes the Steam-Out procedure; the appli cation is used in order to empty the heater.
1 Steam Out
The machine enters in Steam-Out mode by holding pressed to gether:
• the B button and the L button;
while switching on the machine by main switch behind it .
Once entered the Steam Out mode the display shows the “STEAM
OUT” indication. Buttons can be released
IMPORTANT NOTE: to execute the Steam-out procedure the Ntc
sensor must work correctly; if some errors occurs on Ntc during t he
steam-out, the procedure can’t continue and an error me ssage is
shown on the display.
IMPORTANT NOTE: to execute the Steam-Out procedure the
DREGDRAWER must be in place and the DOOR must be closed.
If these 2 conditions are not respected a warning message is shown
on the display and the Steam-Out is interrupted.
The machine starts the Steam Out and in the display appea rs the
indication “ON”.
While the Steam Out runs the Electro valve is opened an d water
comes out the Water/Steam pipe.
When the Steam Out is complete the message “COMPLETE” is
shown on the Display.The Electro valves automatically clo ses and the
machine can be switched off.
When the Steam-Out is complete the following parameter s are reset to their default values:
Steam-Out PicoBaristo
FileName
20150804_SteamOut_PicoBaristo_v01.doc
02 Nicola.Laffi@philips
.com
07/08/2015 2/5
revNum Author Verified Approved SaveDate Pagina/pagine
Introduction
This document describes the Steam-Out procedure; the appli cation is used in order to empty the heater.
1 Steam Out
The machine enters in Steam-Out mode by holding pressed to gether:
• the B button and the L button;
while switching on the machine by main switch behind it .
Once entered the Steam Out mode the display shows the “STEAM
OUT” indication. Buttons can be released
IMPORTANT NOTE: to execute the Steam-out procedure the Ntc
sensor must work correctly; if some errors occurs on Ntc during t he
steam-out, the procedure can’t continue and an error me ssage is
shown on the display.
IMPORTANT NOTE: to execute the Steam-Out procedure the
DREGDRAWER must be in place and the DOOR must be closed.
If these 2 conditions are not respected a warning message is shown
on the display and the Steam-Out is interrupted.
The machine starts the Steam Out and in the display appea rs the
indication “ON”.
While the Steam Out runs the Electro valve is opened an d water
comes out the Water/Steam pipe.
When the Steam Out is complete the message “COMPLETE” is
shown on the Display.The Electro valves automatically clo ses and the
machine can be switched off.
When the Steam-Out is complete the following parameter s are reset to their default values:
Steam-Out PicoBaristo
FileName
20150804_SteamOut_PicoBaristo_v01.doc
02 Nicola.Laffi@philips
.com
07/08/2015 2/5
revNum Author Verified Approved SaveDate Pagina/pagine
Introduction
This document describes the Steam-Out procedure; the appli cation is used in order to empty the heater.
1 Steam Out
The machine enters in Steam-Out mode by holding pressed to gether:
• the B button and the L button;
while switching on the machine by main switch behind it .
Once entered the Steam Out mode the display shows the “STEAM
OUT” indication. Buttons can be released
IMPORTANT NOTE: to execute the Steam-out procedure the Ntc
sensor must work correctly; if some errors occurs on Ntc during t he
steam-out, the procedure can’t continue and an error me ssage is
shown on the display.
IMPORTANT NOTE: to execute the Steam-Out procedure the
DREGDRAWER must be in place and the DOOR must be closed.
If these 2 conditions are not respected a warning message is shown
on the display and the Steam-Out is interrupted.
The machine starts the Steam Out and in the display appea rs the
indication “ON”.
While the Steam Out runs the Electro valve is opened an d water
comes out the Water/Steam pipe.
When the Steam Out is complete the message “COMPLETE” is
shown on the Display.The Electro valves automatically clo ses and the
machine can be switched off.
When the Steam-Out is complete the following parameter s are reset to their default values:
PICO BARISTO 05 SERVICE MODE
9/11
5.2 Steam Out
Before executing the steam out procedure, descale the machine taking care to remouve the Aqua -
clean filter from the appliance.
In case the filter on the machine is active (or it’s in the machine) provide the consumer with a new
one.
Introduction
This document describes the Steam-Out procedure; the application is used in order to empty the
heater.
Steam Out
The machine enters in Steam-Out mode by holding pressed together:
• the B button and the L button;
while switching on the machine by main switch behind it.
When the Steam-Out is complete the following parameters are reset to their default values:
Parameters
D e f a u l t
value
Description
espresso_qty 150 Dose (in impulse) of the “Espresso”
espresso_lungo_qty 255 Dose (in impulse) of the “Espresso Lungo”
caffe_crema_qty 350 Dose (in impulse) of the “Caffe Crema”
ristretto_qty 130 Dose (in impulse) of the “Ristretto”
espresso_double_qty 250 Dose (in impulse) of the “EspressoDouble”
cappuccino_qty 185 Dose (in impulse) of the coffee cycle in the “Cappuccino”
cappuccino_seconds 340
Dose (in 1/10 seconds) of the milk cycle in the
“Cappuccino”
Once entered the Steam Out mode the display shows the “STEAM
OUT” indication. Buttons can be released
IMPORTANT NOTE: to execute the Steam-out procedure the Ntc sensor
must work correctly; if some errors occurs on Ntc during the steam-out,
the procedure can’t continue and an error message is shown on the dis-
play.
IMPORTANT NOTE: to execute the Steam-Out procedure the DREGDRAW-
ER must be in place and the DOOR must be closed.
If these 2 conditions are not respected a warning message is shown on
the display and the Steam-Out is interrupted.
The machine starts the Steam Out and in the display appears the indica-
tion “ON”.
While the Steam Out runs the Electro valve is opened and water comes
out the Water/Steam pipe.
When the Steam Out is complete the message “COMPLETE” is shown on
the Display.The Electro valves automatically closes and the machine can
be switched off.