Philips PICO BARISTO AMF, Service Manual

Page: 17 / 58

PICO BARISTO 03 BRIEF INSTRUCTIONS
1/6
3.1. Warning icons and error codes PICO BARISTO AMF-OTC
Fill the water tank with fresh
water to the MAX level indication.
The bean hopper is empty. Put
new coffee beans in the bean
hopper.
The hot water dispensing spout
is not installed. Insert the hot
water dispensing spout. (Only
OTC)
The milk carafe is not installed.
Insert the milk carafe into the
machine. (Only OTC)
There is too much powder in
the brew group. Clean the brew
group.
If an error code is triggered, check the section ‘Meaning of error codes’ to see what
the code on the display means and what you can do. The machine cannot be used
when this icon is on the display.
Insert the drip tray and close the
service door.
Meaning of the warning icons
Warning signals are displayed in red. Below you find a list of the warnings that may appear on the
display and their meaning.
Remove the coffee grounds
container and empty it.
ADD WATER
- Fill the water tank with fresh water to the MAX level indication.
ADD COFFEE
- The bean hopper is empty. Put new coffee beans in the bean hopper.
- The brew group is not in the machine. Insert the group.
INSERT
WATER SPOUT
- The hot water dispensing spout is not installed. Insert the hot water
dispensing spout.
- Insert the drip tray and close the service door.
35
English
ADD WATER
- Fill the water tank with fresh water to the MAX level indication.
ADD COFFEE
- The bean hopper is empty. Put new coffee beans in the bean hopper.
- The brew group is not in the machine. Insert the group.
INSERT
WATER SPOUT
- The hot water dispensing spout is not installed. Insert the hot water
dispensing spout.
- Insert the drip tray and close the service door.
35 English
ADD WATER
- Fill the water tank with fresh water to the MAX level indication.
ADD COFFEE
- The bean hopper is empty. Put new coffee beans in the bean hopper.
- The brew group is not in the machine. Insert the group.
INSERT
WATER SPOUT
- The hot water dispensing spout is not installed. Insert the hot water
dispensing spout.
- Insert the drip tray and close the service door.
35
English
INSERT CARAFE
- The milk carafe is not installed. Insert the milk carafe into the machine.
- Remove the coffee grounds container and empty it.
- There is too much powder in the brew group. Clean the brew group.
10
SUPPORT REQUIRED
- If an error code is triggered, check the section 'Meaning of error codes' to
see what the code on the display means and what you can do. The mac hine
cannot be used when this icon is on the display.
Meaning of error codes
Error code Problem Cause Possible solution
1 Coffee grinder blocked Coffee exit duct clogged Clean the coffee exit
duct thoroughly with the
handle of the
multifunctional tool or a
spoon handle.
36
English
INSERT CARAFE
- The milk carafe is not installed. Insert the milk carafe into the machine.
- Remove the coffee grounds container and empty it.
- There is too much powder in the brew group. Clean the brew group.
10
SUPPORT REQUIRED
- If an error code is triggered, check the section 'Meaning of error codes' to
see what the code on the display means and what you can do. The mac hine
cannot be used when this icon is on the display.
Meaning of error codes
Error code Problem Cause Possible solution
1 Coffee grinder blocked Coffee exit duct clogged Clean the coffee exit
duct thoroughly with the
handle of the
multifunctional tool or a
spoon handle.
36
English
INSERT CARAFE
- The milk carafe is not installed. Insert the milk carafe into the machine.
- Remove the coffee grounds container and empty it.
- There is too much powder in the brew group. Clean the brew group.
10
SUPPORT REQUIRED
- If an error code is triggered, check the section 'Meaning of error codes' to
see what the code on the display means and what you can do. The mac hine
cannot be used when this icon is on the display.
Meaning of error codes
Error code Problem Cause Possible solution
1 Coffee grinder blocked Coffee exit duct clogged Clean the coffee exit
duct thoroughly with the
handle of the
multifunctional tool or a
spoon handle.
36
English
INSERT CARAFE
- The milk carafe is not installed. Insert the milk carafe into the machine.
- Remove the coffee grounds container and empty it.
- There is too much powder in the brew group. Clean the brew group.
10
SUPPORT REQUIRED
- If an error code is triggered, check the section 'Meaning of error codes' to
see what the code on the display means and what you can do. The mac hine
cannot be used when this icon is on the display.
Meaning of error codes
Error code Problem Cause Possible solution
1 Coffee grinder blocked Coffee exit duct clogged Clean the coffee exit
duct thoroughly with the
handle of the
multifunctional tool or a
spoon handle.
36 English
ADD WATER
- Fill the water tank with fresh water to the MAX level indication.
ADD COFFEE
- The bean hopper is empty. Put new coffee beans in the bean hopper.
- The brew group is not in the machine. Insert the group.
INSERT
WATER SPOUT
- The hot water dispensing spout is not installed. Insert the hot water
dispensing spout.
- Insert the drip tray and close the service door.
35
English
ADD WATER
- Fill the water tank with fresh water to the MAX level indication.
ADD COFFEE
- The bean hopper is empty. Put new coffee beans in the bean hopper.
- The brew group is not in the machine. Insert the group.
INSERT
WATER SPOUT
- The hot water dispensing spout is not installed. Insert the hot water
dispensing spout.
- Insert the drip tray and close the service door.
35
English
The brew group is not in the
machine. Insert the group.
3.2. Meaning of error codes
Error
code
Problem Cause Possible solution
1 Coffee grinder blocked Coffee exit duct clogged Clean the coffee exit duct
thoroughly with the handle of the
multifunctional tool or a spoon
handle.
3 - 4 The brew group cannot
be removed.
The brew group is
blocked by dirt or is not
positioned correctly.
Close the service door. Switch the
machine off and back on again.
Wait for the ‘machine ready’ icon
on the display and then remove the
brew group.Clean the brew group
and make sure it is well greased.
5 Water circuit problem There is air in the water
circuit.
Remove the AquaClean filter
and switch the machine off and
on again. If the machine works,
replace the filter.
Perform a manual rinsing cycle.