13
Control a play source
1
Press
RADIO
,
USB
or
DISC
button to
select the source you wish to control.
2
Select the desired function (for example
, ).
Navigate through the menu
1
Point the remote control directly at the
remote sensor on the Home Theater
System and select the desired function.
2
Press the following buttons on the
remote control to navigate through the
on-screen menus.
Button
Action
Move up or down
Move left or right
OK
Con
fi
rm a selection
Enter numbers
4 Get started
Insert the remote control
batteries
1
Slide the battery cover off the back of the
remote control.
2
Insert the 2 supplied batteries AAA. Be
sure the + and - ends of the batteries line
up with the markings inside the case.
3
Slide the cover back into position.
Note
Do not mix batteries (old and new or carbon
•
and alkaline, etc.).
Remove batteries if they are exhausted or if
•
the remote control is not to be used for a long
time.
Batteries contain chemical substances, they
•
should be disposed of properly.
English
EN
hts3021_94_eng1.indd Sec1:13
hts3021_94_eng1.indd Sec1:13
1/14/2009 5:46:06 PM
1/14/2009 5:46:06 PM
