29
Video setup
1
Press
SETUP
.
»
[General Setup]
menu is displayed.
2
Press
to select
[Video Setup]
, then
press .
3
Select an option, then press
OK
4
Select a setting, then press
OK
.
To return to the previous menu,
•
press
BACK
.
To exit the menu, press
•
SETUP
.
Note
See the explanations of the above options in
•
the following pages.
[TV System]
Change this setting if the video does not
appear correctly. By default, this setting
matches the most common setting for TVs in
your country.
•
[PAL]
– For PAL-system TV.
•
[NTSC]
– For NTSC-system TV.
•
[Multi]
– For TV that is compatible with
both PAL and NTSC.
Video Setup
Picture Setting
TV Display
TV System
Progressive
[Speakers Delay]
Sets the delay time for the center and rear
speakers if they are placed closer to the
listening position, so that the sound output
from all speakers reach the listening position
at the same time.
1) To start, press
OK
.
2) Select a speaker in the menu, then press
to set the delay time.
3) Press
OK
to con
fi
rm and exit.
Note
Allow 1ms setting for every 1 foot distance
•
between the speaker and the listening position.
[Night Mode]
Makes loud sound level softer and soft sound
level louder so that you can watch the DVD
movies at a low volume, without disturbing
others.
•
[On]
– Enjoys quiet viewing at night.
•
[Off]
– Enjoys surround sound with a full
dynamic range.
Note
Applicable only to Dolby Digital encoded discs.
•
English
EN
hts3021_94_eng1.indd Sec1:29
hts3021_94_eng1.indd Sec1:29
1/14/2009 5:46:09 PM
1/14/2009 5:46:09 PM
