Philips HD4417, Manual

Page: 9 / 108

5 Remove excess oil from the grilling plate with a piece of kitchen paper before you remove
the grilling plate for cleaning.
6 Lift the grilling plate from the base by its handgrips (Fig. 7).
Note: If the thermostat unit is still inserted into the appliance, you cannot remove the grilling plate.
7 Soak the grilling plate in hot water with some washing-up liquid for five minutes or drizzle
some lemon juice onto the grilling plate. This loosens any caked food or grease.
8 Slide the drip tray out of the base (Fig. 8).
Note: The drip tray can only be slid out of the base in one way.
9 Clean the base and the drip tray with a damp cloth.
10 Clean the grilling plate with a soft cloth or sponge in hot water with some washing-up liquid
or in the dishwasher.
11 Dry the grilling plate and drip tray.
The inside of the thermostat unit socket must be completely dry before you reinsert the
thermostat unit into it. To dry the socket, wipe the inside with a dry cloth. If necessary, shake out
excess water first.
12 Reassemble the appliance.
storage
1 Leave the thermostat unit in the grill. Wind the cord and fix it with the cord strap (Fig. 9).
2 Store the grill in upright position on a dry and level surface (Fig. 10).
Note: Make sure that the stoppers are at the bottom, so that the drip tray cannot fall out of the
appliance.
Environment
- Do not throw away the appliance with the normal household waste at the end of its life, but
hand it in at an official collection point for recycling. By doing this, you help to preserve the
environment (Fig. 11).
guarantee & service
If you need service or information or if you have a problem, please visit the Philips website at
www.philips.com or contact the Philips Consumer Care Centre in your country (you find its phone
number in the worldwide guarantee leaflet). If there is no Consumer Care Centre in your country,
go to your local Philips dealer.
Food table (Fig. 12)
EnglisH
9