Philips ErgoLine D310, Manual

Page: 37 / 88

ErgoLine D330/D340
Customer Engineer Manual
Page 2-17
All of the keys shown in Figures 2-2 and 2-4 are programmable. The downloadable
keys are shown in the non-shaded boxes. The function keys on the main terminal and
the DSS 1 keys are programmable on both levels. The numeric keys on the main
terminal are programmable on the second level only. The keys shown in the shaded
boxes (DSS 2 & DSS 3) are not downloadable in SSW 805 but are programmable on
both levels.
Facility Codes and Local Functions
To give the user full access to ISPBX and ErgoLine D330 and D340 facilities, it is
necessary to download facility codes. These facility codes are used for translation when a
function key has been programmed. Some codes need to be downloaded to allow
facilities to be presented in soft-key menus (for example, the automatic ring-back soft-key
is only presented when appropriate and when the automatic ring-back code has been
downloaded). It may also be required to download information to enable or disable certain
local ErgoLine terminal functions.
For the purposes of facility code and local function downloading, the same Operational
Maintenance commands are used as for function key downloading. This means that the
information to be downloaded is entered as if it were to be downloaded to function keys.
Information is downloaded to 'facility numbers' instead of 'function keys'. The facility
numbers have nothing to do with the actual keys and can be considered to be an 'address'
in the ErgoLine terminal memory. Facility codes are always downloaded to key level 0.
Table 2-3 provides a list of functions that can be downloaded and the Facility Number to
which the information is written in the ErgoLine terminal. Since the names used for
particular facility codes differ in various ISPBXs, their unique identity is given in the
column Result ID used when defining facility codes.
Local ErgoLine terminal functions are enabled or disabled by downloading a 0 or a 1. The
parameter name used in OM commands for the facility number is
KEY .
Note : For a number of functions it is also necessary that the user has the correct
facility class marks assigned in the SOPHO-iS. If no facility class mark is assigned
the user cannot use the facility.
T
ABLE
2-3. F
ACILITY
C
ODES AND
A
DDRESSES FOR FACILITY
C
ODE
D
OWNLOADING
INFORMATION TO BE STORED
NUMBER/FACILITY CODE RESULT
ID
26
27
Executive/secretary absence Executive/secretary absent
Executive/secretary present 40
41
28
29
Do-not-disturb Activate do-not-disturb
Cancel do-not-disturb 66
67
30
31
Automatic ring-back Activate automatic ring-back
cancel automatic ring-back 56
57
32
33
Follow-me Activate follow-me
Cancel follow-me 27
32
34 Prepare Prepare follow-me 28
35 Activate from dest Activate follow-me from
destination 29
36 Deactivate from dest Deactivate follow-me from
destination 30
37 Cancel
38 Auto answer 0 = No,
1 = Continuous
2 = 1hour
L
39 Microphone blocked enable 0 = No, 1 = Yes L
40 One keystroke set-up 0 = No, 1 = Yes L
41 Add-on Activate 3-party call 55
FUNCTION
DOWNLOADED
FACILITY
NUMBER