Philips ErgoLine D310 Manual Download | Manualshive

Page: 18 / 88

background image

ErgoLine D330/D340
Customer Engineer Manual

Page 1-12

Loudspeaker

The loudspeaker is used during hands-free operation, for ringing, for error beeps
and for group indication (softringing).

External Microphone

The External Microphone is used during hands-free operation.

2-Wire/4-Wire Line Interface - Refer to page 2-41 for installation

The ErgoLine D330 and ErgoLine D340 have modular line interfaces which allow
the line interface to be changed from a 4-wire DTX-I S

0

interface to a 2-wire DLX-U

U

PN

interface. These changes can be made in the field.

PC Interface - Refer to page 2-39 for more detail

This is used for driving the terminal via a PC allowing TAPI-compliant applications
to be used via this interface.

TAPI is the Microsoft standard for Computer-Telephony Integration (CTI). When this
option is available it is simple for a user to connect a PC to the 9-pin D-type
connector on the rear of the ErgoLine terminal. A TAPI software driver will be
provided enabling TAPI-compliant applications to be used via the interface.

A basic TAPI application introducing the user to TAPI will be included. The TAPI
driver is compatible with Windows 3.1/3.11 and Windows 95.

Handset Cord Socket

This is used to connect the handset or headset. A splitter can also be connected
which allows switching between handset and headset.

Software Hatch

Use to access the PROM sockets on the terminal motherboard.

Audio Socket (D340 only) - Refer to page 2-29 for more detail

An RJ11 socket on the base of the ErgoLine D340 can be used to connect audio
devices (e.g. a voice recorder).

Static Interface Socket (D340 only) - Refer to page 2-30 for more detail

An RJ11 socket on the base of the ErgoLine D340 can be used as an external
control line for items such as a second bell, a door opener or a door lamp. A
single input channel for foot-switch operation is also available.

Optional Power Supply (D340 only)

The ErgoLine D340 is normally line powered. If either a V.24 option or DSS(s) are
fitted, an external power supply is required. This can be fitted in the field.

«
...
16
17
18
19
20
...
»

Summary of Contents for ErgoLine D310

























































































Reviews:

No comments

Related manuals for ErgoLine D310

Univerge SV8100

Brand: NEC Pages: 5

Univerge SV8100

Brand: NEC Pages: 2

Univerge SV8100

Brand: NEC Pages: 184

Univerge SV8100

Brand: NEC Pages: 8

Univerge SV8100

Brand: NEC Pages: 15

Univerge SV8100

Brand: NEC Pages: 14

Brand: NEC Pages: 288

Brand: NEC Pages: 292

Brand: Panasonic Pages: 443

Brand: 2N Pages: 21

Brand: 2N Pages: 59

Brand: GE Pages: 96

Brand: Uniden Pages: 68

Brand: BellSouth Pages: 34

900 MHz Digital Spread Spectrum Dual Keypad Cordless Telephone with Caller ID/Call Waiting...

Brand: Radio Shack Pages: 24

Brand: france telecom Pages: 31

Brand: ETS Pages: 2

Brand: Ipevo Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands