EN 63
3139 785 32804
5.
Firmware Upgrading & Diagnostic Software
Nucleus Name
DS_HDMI_DefaultVideoSet
Nucleus Number
1503
Description
Set a default video configuration in the HDMI TX chip (720x480p)
Technical
-
Write a known configuration for 720x480P in the registers of the HDMI
transmitter chip
Execution Time
Less than 1 second.
User Input
<Id> configures the HDMI transmitter to receive an embedded or a separated
sync signal at its input.
Chose embedded sync if signal comes directly from Leco+ (ITU656) or
separated sync if signal comes from Fli2310.
Id:
<id > HDMI Tx input configuration
0
Separated sync input (default)
1
Embedded sync input
Error
Number
Description
150300
Setting the video configuration succeeded
150301
Failed to retrieve the hardware diversity string
150302
Failed to initialise the IIC communication
150303
The hardware was not detected although indicated by Diversity
150304
Setting the video configuration failed
Example
DS:> 101 11 ntsc all
010100:
Test OK @
DS:> 1516
151600:
Test OK @
DS:> 1503
150300:
Test OK @
or
DS:> 101 0 ntsc pscan
010100:
Test OK @
DS:> 1503 1
150300:
Test OK @
Nucleus Name
DS_HDMI_Reset
Nucleus Number
1504
Description
Reset the HDMI transmitter chip by means of a hardware reset and re-initialize
in order to have the HDMI transmitter chip accessible again.
Technical
-
Pull the reset line connected to the HDMI transmitter low
-
Wait a little while
-
Enable the HDMI chip again by setting the reset line high
Execution Time
9 seconds.
User Input
None
Error
Number
Description
150400
Resetting the HDMI tx chip succeeded
150401
Failed to retrieve the hardware diversity string
150402
Failed to initialise the IIC communication
150403
The hardware was not detected although indicated by Diversity
150404
Resetting the HDMI tx chip trhrough PIO failed.
150405
Software Reset of the HDMI tx chip failed.
Example
DS:> 1504
150400:
Test OK @
http://www.jdwxzlw.com/?fromuser=华盛维修
家电维修资料网,免费下载各种维修资料