EN 71
3139 785 32804
5.
Firmware Upgrading & Diagnostic Software
Nucleus Name
DS_ASP_RealTimeClockSetValues
Nucleus Number
1602
Description
This nucleus is used to set the real time clock to the correct values.
Technical
-
Decode the user input.
-
Write RTC value to ASP.
Execution Time
Less than 1 second.
User Input
User must give time and date like this:
hh:mm:ss dd/mm/yy
Error
Number
Description
160200
Setting the real time clock succeeded
160201
The ASP initialisation failed.
160202
The IIC bus failed.
160203
Wrong user input.
Example
DS:> 1602 03:20:01 22/06/03
160200:
Test OK @
Nucleus Name
DS_ASP_RealTimeClockGetValues
Nucleus Number
1603
Description
This nucleus is used to retrieve the actual real time from the ASP
Technical
-
Read RTC value from ASP.
-
Decode the RTC value.
Execution Time
Less than 1 second.
User Input
None
Error
Number
Description
160300
Retrieving the real time succeeded
160301
The ASP initialisation failed.
160302
The IIC bus failed.
160303
The CRC checksum of the message is wrong.
160304
The Real Time Clock has been found invalid or was not found.
Example
DS:> 1603
Time: 03:20:17
Date: 22/06/03 (dd/mm/yy)
160300:
Test OK @
Nucleus Name
DS_ASP_NTCGet
Nucleus Number
1606
Description
This nucleus reads the value of the NTC-resistor connected to the ASP, which
tells the ambient temperature to the processor.
Technical
-
Read the ADC input pin of the ASP that is connected to the NTC-resistor.
-
Display this value.
Execution Time
Less than 1 second.
User Input
None
Error
Number
Description
160600
Getting the NTC-value succeeded
160601
The IIC bus failed
Example
DS:> 1606
160600: Temperature(NTC) ADC input value = 0x94
Test OK @
http://www.jdwxzlw.com/?fromuser=华盛维修
家电维修资料网,免费下载各种维修资料