Philips 40PFS4052/60, User Manual

Page: 7 / 21

Y Pb Pr - Audio L R
CVBS-Composite video is a high quality connection. Next to
the CVBS signal is the Audio left and right for sound.
Y Pb Pr
Component video is a high quality connection. The YPbPr
connection can be used for High definition (HD) TV signals.
Mini-YPbPr
Please use mini-YPbPr wire to make connection. Match the
YPbPr (green, blue, red) connector colour s with the cable plugs
when you connect.
Use an Audio L/R cinch cable if your device also has sound.
CVBS-Audio L R
CVBS-Composite video is a high quality connection. Next to
the CVBS signal is the Audio left and right for sound.
Audio Out- Optical (SPDIF-OUT)
Audio-Out-Optical is a high quality sound connection. This
optical connection can carr y 5.1 audio channels. If your device,
typically a Home Theatre(HTS), has no HDMI ARC connection,
you can use this connection with the Audio In-Optical connection
on the HTS. The Audio-Out-Optical connection sends the sound
from the TV to the HTS.
You can Press MENU key to enter the main menu and select
SOUND, press OK key enter the submenu, then on the screen
press
 / 
key to select SPDIF Mode, press
 / 
key to adjust
the options, like PCM, Auto, off.
Common interface-CAM
CI+
This TV is ready for the CI conditional Access.
With CI+ you can watch premium HD programs, like movies
and spor ts live offered by digital TV broadcaster s in your region.
These programs are scrambled by the TV broadcaster and
descrambled with a prepaid CI+ module.
Contact a digital TV broadcaster for more information on
terms and conditions.
CAM
Inser t a C AM module.
Switch off the TV before inser ting a C AM.
Use the C AM for the correct method of inser tion. Incorrect
inser tion can damage the C AM and TV.
Use the CI Interface slot on the TV to inser t the C AM card.
With the front of the card facing to you, gently inser t the C AM
as far as it will go.
COMPONE T N
FRONT
CAM
SMART CARD
Leave the card in the slot permanently.
It may take a few minutes before the C AM is activated.
Removing the C AM will deactivate the broadcast ser vice on the
TV.
If a C AM is inser ted and subscription fees are paid,(connection
method can differ), you can watch the TV broadcast. The inser ted
C AM is exclusively for your TV.
Set-top box-STB
Use 2 antenna to connect the antenna to the Set-top box(a
digital receiver) and the TV.
Next to the antenna connections, add an HDMI cable to
connect the Set-top box to the TV.
Auto Standby
If you only use the remote control of the Set-top box. Do this to
prevent the TV from auto standby after a 5 hour period without a
key on the remote control of the TV.
To set Auto Standby, press MENU key and select TIME and press
OK key.
TIME > Auto Standby and set the slider bar to off.
Satellite receiver
Connect the dish antenna cable to the satellite receiver.
Next to the antenna connections, add an HDMI cable to
connect the Set-top box to the TV.
Auto Standby
If you only use the remote control of the Set-top box. Do this to
prevent the TV from auto standby after a 5 hour period without a
key on the remote control of the TV.
To set Auto Standby, press MENU key and select TIME and press
OK key.
TIME > Auto Standby and set the slider bar to off.
TV
Digital Receriver Set Box
DVB-S/S2
Statellite Receriver
7
COMMON INTERFACE