background image

IR sensor

The TV can receive commands from a remote control that 

uses IR(infrared) to send commands. If you use such a remote 
control, hold it close to the TV and make sure you point the 
remote control at the infrared sensor on the front of the TV.

Make sure that the line-of-sight between the remote control 

and TV is not blocked by furniture, walls or other objects.

Batteries

1

.

 Slide the batter y door in the direction shown by the arrow.

2

.

 Inser t two type AAA-LR03-1.5V batteries into remote 

control, make sure the + and the – ends of the batteries line up 
correctly.

3

.

 Reposition the batter y door.

Cleaning

Your Remote control is treated with a scratch-resistant 

coating.

To clean the remote control, use a soft damp cloth. Never use 

substances such as alcohol, chemicals or household cleaner s on 
the remote control.

Channel list

About Channel list

After a channel installation, all channels appear on the channel 

list. Channels are show with their name if this information is 
available.

There is a channel list with all installed channels. You can only 

filter this list to show TV or only Radio channels.

With a channel list selected, press 

/

 key to select a 

channel, then press 

OK

 key to watch the selected channel. You 

can page up or page down the channels in that list when using 

CH-/ CH+ 

key.

Radio stations

If digital broadcasting is available, digital radio stations are 

installed during installation. Switch to a radio channel just like you 
switch to a TV channel.

Open a channel list

To open the current channel list..
Press 

SOURCE

 Key to switch to TV mode(DTV or ATV).

Press 

LIST

 key to open the current channel list.

Press 

LIST 

key again to close the channel list.

Filter a channel list

You can filter a list with all channels. You can set the channel list 

to show only TV channels or only Radio stations.

To set a filter list with all channels.
1. While watching a TV channel.
2. Press 

/

 

key to select a list.

3. You can select ALL, DTV or ATV, HD, Radio list etc.

TV channels

Watching TV channels

Tune to a channel

To watching TV channels, press 

SOURCE

 key to show signal 

menu, you can select Satellite, DTV, ATV and press 

OK

 key to enter.

Switch channels

To switch channels, press 

CH-/CH+ 

key.

If you know the channel number, type in the number in current 

TV channel, then the TV will auto Switch the number channel by 
you typed.

Previous channel

To switch back to the previous tuned channel, press 

BACK

 key 

to return the precious channel

Radio channel

If digital broadcasting is available, digital radio stations are 

installed during installation. Switch to a radio channel just like you 
switch to a TV channel.

About

 

move

 

Channels

1.

 

While

 

you

 

watching

 

TV, press

 

MENU

 

key

 

and

 

select

CHANNEL, press

 

OK

 

key

 

to

 

enter.

2.

 

In

 

channel

 

menu, select

 

Channel

 

Edit

 

and

 

press

 

OK

 

key

 

to

enter

 

into

 

channel

 

list.

3.In

 

channel

 

list, you

 

can

 

press

key

 

to

 

select

 

your

 

channel, press

    

key

 

on

 

the

 

remote

 

control

 

to

 

move

 

channel, and 

press 

key to

 

move

 

it.

4. Press

 

OK

 

key

 

confirm

Lock a channel

Lock and unlock a channel

To prevent children from watching a channel or a programme, 

you can lock channels or lock age Rated programme.

You can lock a channel to prevent children from watching it. To 

watching a lock channel you need to enter the lock code. You can’t 
lock programmes from connected devices.

To set the lock channel

1. While watching TV channels, press 

MENU 

key and select 

LOCK, press 

OK

 key to enter.

2. Input the code in lock system to log in, select channel lock and 

press 

OK

 key to enter the channel list.

3. Press 

 

key to select your channel and press      key on 

the remote control to lock the channel, press      key again to 
unlock the channel.

Parental Guidance

To prevent children from watching a programme not suitable for 

their age, you can use Parental Guidance.

Some digital broadcaster s have age rated their programmes. 

When the age rating of a programme is equal to or higher than the 
age you have set as age rating for your child, the programme will be 
locked.

To set an age rating..
1. While watching TV channels, press 

MENU 

key and select 

LOCK, press 

OK

 to enter.

2. Input the code in lock system to log in, select Parental 

Guidance and press 

OK

 key to enter.

3. Press 

/

 

key to select your age rating.

The TV will ask for the code to unlock the programme. For some 

broadcaster s/operator s, the TV only locks programme with a 
higher rating.

Favourite Channels

About Favourite Channels

You can create a favourite channel list that only holds the 

channels you want to watch. With The Favourite channel list 
selected, you will only see your favourite channels when you switch 
Through channels.

Create a Favourite list

1. While you watching TV, press 

MENU 

key and select 

CHANNEL, press 

OK

 key to enter.

2. In channel menu, select Channel Edit and press 

OK

 key to 

 

/

 

/

 

/

 

11

Summary of Contents for 40PFS4052/60






















Reviews: