Philips 40PFS4052/60, User Manual

Page: 19 / 21

Software
Software update
It might be necessar y to update the TV software. You need a
computer and a USB memor y device to upload the software on
the TV. Use a USB memor y device with 256MB free space. Make
sure that write protection is switched off.
1. Start the update on TV.
To start the software update....
Press MENU key, select SETTING and press OK key. Select
Software Update (USB), press OK key to star t update the
software.
Identify the TV.
Inser t the USB memor y into one of the USB connections of
the TV. An identification file is written on the USB memor y
device.
Download the TV software.
Inser t the USB memor y into your computer.
On the USB memor y device, select locate file and check it
carefully. View the software name as below:
Model
：
Software name
40PFS4052/60 MSD3463_S_ N51_48.bin
After download these files, and copy them onto the USB
memor y device. Do not place the file in a folder.
• Inser t the USB memor y device to the TV.
• Press
MENU key to show Main menu, select SETTING and
press OK key to enter.
• Select Software Update (USB), press OK key and select YES,
the TV will upgrade software automatically.
• When the upgrade process is complete 100%, the TV will
automatically restar t the boot up .
Update the TV software
The update star ts automatically. The TV itself off for about a
minutes and then back on again, please wait.
Notice:
• Do not use the remote control.
• Do not remove the USB memor y device from the TV.
• Please keep the power stable during the upgrade software, if
it suddenly power off will damage for the TV.
Open source software
This television contains open source software. TP Vision
Europe B.V. hereby offer s to deliver, upon request, a copy of the
complete corresponding source code for the copyrighted open
source software packages used in this product for which such
offer is requested by the respective licenses.
This offer is valid up to three year s after product purchase to
anyone in receipt of this information. To obtain the source code,
please write in English to this email address
open.source@tpvision.com.
Open source license statement
Acknowledgements and License Texts for any open source
software used in this Philips TV
.
This is a document describing the distribution of the source
code used on the Philips TV
,
which fall either under the GNU
General Public License
(
the GPL
),
or the GNU Lesser General
Public License
(
the LGPL
),
or any other open source license
.
Instr uctions to obtain source code for this software can be found
in the user manual
.
PHILIPS MAKES NO WARRANTIES WHATSOEVER
,
EITHER
EXPRESS OR IMPLIED
,
INCLUDING ANY WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
S
PURPOSE
,
REGARDING THIS SOFTWARE
.
Philips offer s no
suppor t for this software
.
The preceding does not affect your
warranties and statutor y rights regarding any Philips product
(
s
)
you purchased
.
It only applies to this source code made available
to you
.
This television contains open source software
.
TP Vision
Europe B
.
V
.
hereby offer s to deliver
,
upon request
,
a copy of the
complete corresponding source code for the copyrighted open
source software packages used in this product for which such offer
is requested by the respective licenses
.
This offer is valid up to
three year s after product purchase to anyone in receipt of this
information. To obtain the source code, please write in English to...
Intellectual Proper ty Dept.
TP Vision Europe B.V.
Prins Bernhardplein 200
1097 JB Amsterdam
19
Troubleshooting and
support
General issues
The TV cannot be switched on:
• Disconnect the power cable form the power outlet. Wait for
one minute before reconnecting it.
• Check that the power cable is securely connected.
The remote control is not working properly:
• Check that the remote batteries are correctly inser ted
according to the “+/-” orientation.
• Replace the remote control batteries if they are flat or weak.
• Clean the remote control and TV sensor lens.
The TV menu is in the wrong language:
• Change the TV menu to your preferred language.
When turning the TV on /off or to standby, you hear a creaking
sound from the TV chassis:
• No action is required. The creaking sound comes from the
normal expansion and contraction of the TV as it cools down and
warms up. This doesn’t impact its performance.
Channel issues
No digital channels found during the installation:
• See the technical specifications to make sure that your TV
suppor ts DVB-T or DVB-C in your countr y.
• Make sure that all cables are proper ly connected.
Previously installed channels do not appear in the channel list:
• Check that the correct channel list is selected.
Picture issues
The TV is on, but there is no picture:
• Check that the antenna is proper ly connected to the TV.
• Check that the correct device is selected as the TV source.
There is sound but no picture:
• Check that the picture settings are correctly set.
Poor TV reception from the antenna connection:
• Check that the antenna is proper ly connected to the TV.
• Loudspeaker s, unear thed audio devices, neon lights, high
buildings and other large objects can influence reception quality. If