Philips 40PFS4052/60, User Manual

Page: 6 / 21

Connecting Your Devices
About connection
Connectivity guide
Always connect a device to the TV with the highest quality
connection Available. Also use good quality cables to ensure a
good transfer of picture and sound. If you need help to connect
several devices to the TV, you can visit the Philips TV connectivity
guide. The guide offer s information on how to connect and which
cables to use. Go to www.connectivityguide.philips.com.
Antenna port
If you have a Set-top box (a digital receiver) or Recorder,
connect the antenna cables to r un the antenna signal through the
Set-top box or Recorder fir st before it enter s the TV. In this way,
the antenna and Set-top box can send possible additional
channels to the Recorder to record.
DVB-T/T2
HDMI ports
HDMI Quality
An HDMI connection has the best picture and sound quality.
Use an HDMI cable for TV signal.
For best signal quality transfer, use a High speed HDMI cable and
do not use an HDMI cable longer than 5 m.
HDMI MHL
HDMI 3 connection on the TV have HDMI MHL (Mobile High-
Definition Link).
HDMI CEC-Easylink
Easylink:
With Easylink you can operate a connected device
with the TV remote control, EasyLink uses HDMI CEC(Consumer
Electronics Control) to communicate with the connected devices.
Devices must suppor t HDMI CEC and must be connected with an
HDMI connection.
EasyLink setup: The TV comes with Easylink switched on. Make
sure that all HDMI CEC settings are proper ly set up on the
connected EasyLink devices. EasyLink might not wor k with devices
from other brands.
HDMI CEC on other brands: The HDMI CEC functionality has
different names on different brands. Some examples are: Anynet,
Aquos Link, Bravia Theatre Sync, Kuro Link, Simplink and Viera Link.
Not all brands are fully compatible with EasyLink.
Example HDMI CEC branding names are proper ty of their
respective owner s.
Operate devices: You can operate a device connected to HDMI
and set up with HDMI CEC of TV connections. Press MENU key to
enter the main menu and select SETTING, press OK key enter the
setting menu, on the screen press
 / 
key to select HDMI CEC .
Press OK key to enter submenu, select CEC control to turn on and
you can adjust these options.
Easy-Link On or Off: Enter the setting menu, on the screen
press
 / 
key to select HDMI CEC . Press OK key to enter
submenu, select CEC control to turn on or off.
Easy-Link Remote Control: If you want devices to communicate
but you don’t want to operate them with the TV remote control,
you can switch off Easy-Link remote control separately.
You can control multiple HDMI-CEC compliant devices with
your TV remote control.
In the settings menu, select EasyLink Remote control and select
off.
DVI to HDMI
If you still own a device that only has a DVI connection, you can
connect the device to any of the HDMI connection with a DVI to
HDMI adapter.
Use a DVI to HDMI adapter if your device only a DVI
connection. Use one of the HDMI connection and add an Audio
L/R cable to Audio in for sound, on the back of the TV.
Copy protection
DVI and HDMI cables suppor t HDCP(High-bandwith Digital
Content Protection). HDCP is a copy protection signal that
prevents copying content from a DVD disc or Blu-ray Disc. Also
referred to as DRM(Digital Rigital Management).
6