manualshive.com logo in svg

Philips 26FW5220, Service Manual

Share
Download
Philips 26FW5220 Service Manual Download Page 93

Tuner and IF 

A Philips UR13xx Tuner with second input (for FM Radio) is used in the TV board. The 
SIF and FM signals are decoded by the Hercules. Tuning is done via I2C. 
 

Video IF Amplifier 

The IF-filter is integrated in a SAW (Surface Acoustic Wave) filter. One for filtering IF-
video (1328) and one for IF-audio (1330). The type of these filters is depending of the 
standard(s) that has to be received. 
The output of the tuner is controlled via an IF-amplifier with AGC-control. This is a 
voltage feedback from pin 31 of the Hercules to pin 1 of the tuner. The AGC-detector 
operates on top sync and top white level. AGC take-over point is adjusted via the 
service alignment mode 'Tuner' - 'AGC'. If there is too much noise in the picture, then it 
could be that the AGC setting is wrong. The AGC-setting could also be mis-aligned if 
the picture deforms with perfect signal; the IF-amplifier amplifies too much. 
 

Video: TV Part (diagrams A1, A2, and A3) 

 

 

Figure: Block diagram video processing 
 

Summary of Contents for 26FW5220























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands