Philips 202P70/00, Service Manual

Page: 12 / 90

OSD Adjustments
12
Go to cover page
202P7 CRT
The OSD Controls
BRIGHTNESS
To adjust your screen's brightness, follow the steps below. Brightness
is the overall intensity of the light coming from the screen. A 50%
brightness is recommended.
1) Press the or button on the monitor. The BRIGHTNESS window
appears.
2) Press the or button to adjust the brightness.
3) When the brightness is adjusted to the level desired. Stop pressing
the or button and after three seconds the BRIGHTNESS
window will disappear with the new adjustment saved.
Smart Help After the BRIGHTNESS window has disappeared, to
continue to the CONTRAST window, follow the steps under CONTRAST.
CONTRAST
To adjust your screen's contrast, follow the steps bellow. Contrast is
the difference between the light and dark areas on the screen. A 100%
contrast is recommended.
1) Press the or button on the monitor. The CONTRAST window
appears.
2) Press the or button to adjust the contrast.
3) When the contrast is adjusted to the level desired, stop pressing
the or button and after three seconds the CONTRAST window
will disappear with the new adjustment saved.
Smart Help After the CONTRAST window has disappeared, to continue
to the MAIN CONTROLS, follow the steps under LANGUAGE.
LANGUAGE
The ON SCREEN DISPLAY shows its setting in one of eight languages.
The default is English, but you can select French, Spanish, German,
Italian, simplify-Chinese, Korea or Portuguese.
1) Press the button the monitor. The MAIN CONTROLS window
appears. LANGUAGE should be highlighted.
2) Press the button again. The LANGUAGE window appears.
INPUT
SIGNALSELECTION
3) Press the button. The INPUT SIGNAL SELECTION w
3) Press the or button until the desired language is highlighted.
4) press the button to confirm your selection and return to MAIN
CONTROLS window. Close MAIN CONTROLS will be highlighted...
Smart Help After returning to MAIN CONTROLS......to continue to
INPUT SIGNAL SELECTION,press the
button until INPUT SIGNAL
SELECTION is highlighted. Next, follow step 3-5 under
.
......to exit completelly,press the button
INPUT SIGNAL SELECTION (Not available in all models)
INPUT SIGNAL SELECTION determines what you see on the screen.
The default setting is INPUT A, but if the video input signal is different
that the output signal, you may want to change it to INPUT B.
1) Press the button on the monitor. The MAIN CONTROLS window
appears.
2) Press the button until INPUT SIGNAL SELECTION is highlighted.
indow
appears.
4) Press the or button to highlight INPUT B or INPUT A.
5) Press the button to confirm your selection and return to the
MAIN CONTROLS window.CLOSE MAIN CONTROLS will be
highlighted.