Philips Saeco Exprelia Series, Service Manual

Page: 45 / 56

EXPRELIA 07 DISASSEMBLY
Saeco International Group Rev. 00 / June 2010 Page / 09
7.5. Steam pump
7.6. Coffee pump
7.7. Turbine
1 ) Loosen the screws as illustrated and remove all
electrical connections from the component support
2 ) Extract the pump from the supports and
disconnect it from the electrical and water circuit
connections
Lift the turbine out of the casing assembly and remove the electrical and
water circuit connections
1 )Remove the card cover by raising
it
2 )Loosen the screws as illustrated
and remove the PWR card
extracting the electrical connections
Slide out the two pump supports (highlighted)
fi xed to the housing and disconnect the electrical
and water circuit connections
04
7.9. Steam boiler
1-2)Unscrew the screws shown
3)Unhook the boiler, disconnect the
electrical and water circuit connections
1
2
7.8. Power card