Philips Saeco Exprelia Series, Service Manual

Page: 35 / 56

EXPRELIA 05 TROUBLESHOOTING
Saeco International Group Rev. 00 / June 2010 Page / 07
5.2. Diagnostics mode
05
To enter Diagnostics mode: To enter Diagnostics mode:
- Switch on the machine - Switch on the machine
- Press the four function keys in the sequence indicated below (1,2,3,4) before the heating bar is - Press the four function keys in the sequence indicated below (1,2,3,4) before the heating bar is
completed completed
Entering Diagnosis Mode shows a screen like the one in the following diagram and pressing
scrolls through all the menus present scrolls through all the menus present
OK ESC
MENU
1
2
3
4
MENU
PRODUCT COUNTER
ERROR COUNTER
WATER COUNTER
BREWING UNIT RINSING
MAX GRINDER DOSE
MAX GROUND
HOTWATER FLOWRATE
CUP TEMPERATURE
MENU
PRODUCT COUNTERS
ERROR COUNTERS
WATER COUNTERS
BREWING UNIT CLEANING
MAX GRINDER DOSE
MAX GROUND
HOTWATER FLOWRATE
CUP TEMPERATURE
DESCRIPTION
This represents the number of times the C:A: has dispensed each beverage
This displays the total number of “out of order” (fail) errors occurring in the
system and enables resetting. The max number of counted “fails” is 20
This shows the water consumption (in pulses) after dispensing beverages,
for the descaling cycle, the unit cleaning cycle and fi lter activation
This shows the water consumption after the last unit cleaning cycle and
the number of times cleaning has been performed
This is used to select the highest dose threshold the coffee grinder can
accommodate
This is used to select the maximum number of coffee grounds batches.
The range of the number of coffee grounds batches can vary from 10 to 20
This is used to select the maximum delay between two water pulses in the
fl ow meter
This is used to select the average or normal temperature of the coffee in a
cup
OK
ESC
MENU
MENU
PRODUCT COUNTER
ERROR COUNTER
WATER COUNTER