Philips Saeco Exprelia Series, Service Manual

Page: 16 / 56

EXPRELIA 03 USER INSTRUCTIONS
Saeco International Group Rev. 00 / June 2010 Page / 05
A beverage containing milk has
been selected. The machine asks
you to place the carafe handle
spout in its dispensing position.
Press “ESC” to cancel the
procedure
An operation has been selected
that requires dispensing from the
milk container.
Insert the milk container. Press
“ESC” to cancel the procedure
The appliance requires a descaling
cycle.
With this message you can keep on
using the machine but there is the
risk it will not work properly.
The machine requires replacement
of the "Intenza" fi lter with a new
one.
The alarm is displayed only if the
"enable fi lter" function is ON.
An even has occurred that requires
restarting the appliance.
Take note of the code (E xx) shown
at the bottom
Red LED blinking Machine on Standby.
It is possible to change the Standby settings
Press the button to exit Standby
The carafe rinse function has been
selected.
Press “ESC” to cancel the
procedure
Insert the dregs
drawer
Open the front hatch and empty
the drip tray underneath the
brewing unit. You should also
empty the dreg drawer, as the
dregs counter will also be reset
when the machine is switched on.
INSERIRE
CONTENITORE FONDI
SVUOTARE VASCA
GRUPPO
RUOTARE CARAFFA
IN EROGAZIONE
ESC
RUOTARE CARAFFA
IN RISCIACQUO
ESC
INSERIRE CARAFFA
ESC
RIAVVIARE PER
RISOLVERE IL
PROBLEMA
04